Cummins Engine Soil Moving Equipment 315hp Mining Motor Grader
Earth Moving Machinery
Sinoway SWG315 motor grader are mainly used in Mining,earthmoving, engineering construction scarification or snow removal work on road,and so on .They are necessary construction machines for national defense engineering ,mine construction, town and country roads building ,and farmland improvement.
Advantages
Cummins engine delivers great power, performance and stability.
German ZF electronic-hydraulic control power shift gearbox offers 6 forward gears and 3 reverse gears for easy operation.
International brand rear axle uses a differential to provide sufficient traction to wheels on one side of the motor grader when wheels on the other side tend to slip on the road surface. The middle and rear wheels are fitted with planetary gear for reliable operation.
Tandem drive uses gears for stability and reliability in power transmission.
Road grader SWG315 is a rear-wheel-drive vehicle, with the front axle forced to turn during steering. The front axle has been put through a process known as cascade welding.
Wet multi-disc brake comes with twin hydraulic circuits for steady braking motion, maximum safety and maintenance-free performance.
Spacious cab offers a wide-angle view. Three-level alarm indicators and various other monitoring instruments ensure maximum safety. Ergonomic layout design of control elements makes for great comfort ion operation. Vibration-damping cab seat is adjustable in 3 directions, allowing cab driver to operate the console with great ease.
Falling object protective structures (FOPS) and rollover protective structure (ROPS) are as optional.
Engine | |
Model | CUMMINS |
Type | Six-cylinder,water-cooled,turbocharged,electronic injection,tier III |
Rated power | 228KW |
Rated speed | 2100rpm |
Transmission System | |
Torque conveter type | 3 elements, single stage |
Torque ratio | 2.8 |
Cooling type | Oil cooled, pressure circulation |
Gearbox type | Power shift |
Gear shifts(Forward/Reverse)Travelling speed(km/h) | F6/R3 |
Forward/Reverse I | 5.2/5.2 |
Forward/Reverse II | 8.1/12.5 |
Forward/Reverse III | 12.5/27.1 |
Forward IV | 19.1 |
Forward V | 27.1 |
Forward VI | 40 |
Steering System | |
Front wheel steering angle | 50º(L/R) |
Articulated steering angle | 27º(L/R) |
Drive type | Dual action cylinder |
Axle | |
Drive type | Four wheel drive(6×4) |
Front axle ground clearance | 670mm |
Front wheel lean | 17º(L/R) |
Oscillation | ±15º |
Drive axle | Imported No-SPIN differentia |
Working Equipment | |
Control system | Hydrostatic drive system |
Hydraulic pump | Gear pump |
Control valve | Two sets, five pieces per set |
Control pressure | 25MPa |
Hydraulic oil cylinder | Dual action cylinder |
Max. tractive force | 165KN |
Ground penetration | 470mm |
Blade width | 4920mm |
Blade cycling | 360º |
Max. bank cutting angle | 80º(L/R) |
Operating weight | 26000kg |
Braking System | |
Service brake | Wet brake,actuate 4 rear wheels |
Parking brake | Hand operated hoop brake |
Dimensions | |
Overall length | 10500mm |
Overall width(wheel outside) | 3140mm |
Overall height | 3650mm |
Wheel base | 7760mm |
Front tread | 2494mm |
Rear tread | 2494mm |
Tyre size | 18.00-25 |
Service Capacities | |
Fuel tank | 380L |
Engine crank case | 30L |
Hydraulic tank | 130L |
Gear box | 45L |
Rear axle | 35L |
Balance box | 40L(each) |
Worm gear case | 6L |
Tandem Drive | |
Type | Swing type with roller chain transmission |
Speed ratio | 18.03 |