Earth Moving Machinery
SINOWAY SWG165 Motor Graders are mainly used in ground leveling ,canalling , slope scraping ,earthmoving ,scarification or snow removal work on road, airfield ,farmland ,and so on .They are necessary construction machines for national defense engineering ,mine construction, town and country roads building ,and farmland improvement.
Performance and Characteristic
New appearance design.
The articulation frame is adopted and matched with the steering of the front wheel, With small turning radius,maneuvering and flexible.
The electro-hydraulic controls the power shift gearbox,with 6 forward gears and 3 reverse gears.
The international matching hydraulic parts are adopted,with reliable operation.
The motions of the blade are fully hydraulically controlled.
The rear axle is the three-section driving axle which is provided with the NO-SPIN self-locking differential mechanism.
The manipulation table and seats are adjustable. The arrangement of the manipulation handle and instruments are reasonable,with convenient application,and the comfort of driving is improved .
The cab is grand and nice,with wide eyeshot and good sealing .
The front bulldozing plate, rear scarification device,front scarification harrow and automatic leveling device can be added .
Equipped with Cummins engine, 165hp, ZF tech. transmission, heavy duty blade, cabin with air conditioner. Front dozer and five shank ripper as optional.
Engine | |
Model | Cummins 6BTA5.9 |
Type | Six-cylinder,water-cooled,turbocharged, aftercooled, mechanical injection |
Rated power | 125KW |
Rated speed | 2300rpm |
Transmission System | |
Torque conveter type | 3 elements, single stage |
Torque ratio | 1.5~3 |
Cooling type | Oil cooled, pressure circulation |
Gearbox type | Power shift |
Gear shifts(Forward/Reverse)Travelling speed(km/h) | F6/R3 |
Forward/Reverse I | 5.31/5.31 |
Forward/Reverse II | 8.21/13.33 |
Forward/Reverse III | 13.33/30.55 |
Forward IV | 20.47 |
Forward V | 30.55 |
Forward VI | 44.9 |
Steering System | |
Front wheel steering angle | 45º(L/R) |
Articulated steering angle | 25º(L/R) |
Drive type | Dual action cylinder |
Axle | |
Drive type | Four wheel drive(6×4) |
Front axle ground clearance | 630mm |
Front wheel lean | 17º(L/R) |
Oscillation | ±15º |
Drive axle | Three stages with No-SPIN differential |
Working Equipment | |
Control system | Hydraulic drive system |
Hydraulic pump | Gear pump |
Control valve | Two sets, five pieces per set |
Control pressure | 18MPa |
Hydraulic oil cylinder | Dual action cylinder |
Max. tractive force | 73.5KN |
Max. lift above ground | 450mm |
Ground penetration | 500mm |
Blade width | 3660mm |
Blade cycling | 360º |
Max. bank cutting angle | 90º(L/R) |
Operating weight | 14000kg |
Braking System | |
Service brake | Hydraulic caliper disc brake actuate 4 rear wheels |
Parking brake | Hand operated hoop brake |
Dimensions | |
Overall length | 8500mm |
Overall width(wheel outside) | 2600mm |
Overall height | 3500mm |
Wheel base | 6062mm |
Front tread | 2150mm |
Rear tread | 2340mm |
Tyre size | 17.5-25 |
Service Capacities | |
Fuel tank | 228L |
Engine crank case | 19L |
Hydraulic tank | 130L |
Gear box | 21L |
Rear axle | 28L |
Balance box | 23L(each) |
Worm gear case | 2.5L |
Tandem Drive | |
Type | Swing type with roller chain transmission |
Speed ratio | 18.03 |