Earthmoving Equipment
Sinoway hydraulic excavator has been tested, re-designed and then re-specified after market proved, and finally built to withstand numerous applications. Reliable major components like Cummins engine, Kawasaki hydraulics and our cutting edge technology to produce hydraulic excavators are the reasons why Sinoway excavator lasts. Through our crawler excavator category, starting with 0.05 m3 bucket up to 2.0 m3, you will fine one fits your requirement.
Main Features
Unmatched performance driven by the Cummins Engine enhances torque output with more power and breakout force at lower engine speeds.
Options for auxiliary hydraulic piping include bidirectional variable high flow line, an additional line for rotating attachments and also a single acting line. The quick coupler further ensures you get the most out of your machine by easily switching between a wide range of attachments to suit any application.
Hydraulic request signals detect activity, decreasing and increasing engine speed as required. Power is supplied only as needed, achieving optimum fuel efficiency.
The lifting arm, arm and bucket of reinforced design offer for the complete unit a higher adaptability to severe working conditions, and implements such as breaking hammer and grab bucket can be installed as options.
The cab, spacious, bright, pantoscopic and properly sealed, is equipped with 8-way adjustable seat, two-stage filtering heater & A/C system and three-stage silicone oil rubber shock absorber, providing a good damping effect and a favorable driving comfort.
Engine | |
Model | Cummins B5.9 |
Type | Six-cylinder,water-cooled, turbocharged,mechanical injection |
Rated power | 112KW |
Rated speed | 2100rpm |
Main Technical Specification | |
Operating weight | 23000Kg |
Standard bucket capacity | 1.0m3 |
Slewing speed | 13rpm |
Stick digging force | 100KN |
Bucket digging force | 130KN |
Travelling System | |
Travelling speed | 3~5km/h |
Grade ability | 65% |
Ground pressure | 0.045MPa |
Dimensions | |
Overall length | 9845mm |
Overall width | 3000mm |
Overall height of boom | 3300mm |
Overall height of cab | 2755mm |
Engine cover height | 2300mm |
Counterweight clearance | 1060mm |
Ground clearance | 465mm |
Upperstructure width | 2710mm |
Rear-end length/Slewing radius | 2940mm |
Overall track length | 4510mm |
Track length on ground | 3720mm |
Track gauge | 2400mm |
Track width | 600mm |
Boom slewing angle(L/R) | 0 |
Operating Scope | |
Arm length | 3000mm |
Max. cutting height | 9520mm |
Max. dumping height | 6800mm |
Max. digging depth | 6830mm |
Max. reach | 10400mm |