TUV approved PV1-F 2.5 4 6mm2 solar extension cable with connector
Description:
- One pair ( black or red ) 14AWG 12AWG 10AWG Solar Extension Cable.
- Extends and locks built-in cables.
- Two cables with connecters at one end connecting to solar panel and bare on the other end connecting to solar charge controller.
- The wiring is weatherproof and designed to withstand extreme heat and cold.
- Solar panel cable is typically sold in 14, 12 and 10 AWG sizes. The solar panel cable offered in this listing is 10 AWG which is the largest diameter of the three. Using large diameter cable minimizes power loss in your solar panel system.
Extension cable with connector
Trademark | PNTECH |
Type | PV004 |
Rated Voltage | 1000VDC |
Rated impulse voltage | 8000V |
Rated insulation voltage | 6000V |
Rated Current | 30A |
Standard | EN50521:11-2008 |
Protection Degree | IP67 |
Contact Resistance | ≤5mΩ |
Pollution Degree | 2 |
Ambient Temperature | -40~+85℃ |
Cable cross section area | 2,5mm2, 4,0mm², 6,0mm2 |
Insulation Material | PC EXL9330 |
Flame Class | UL94-V0 |
Type | PV1-F 1x2.5/4/6mm2 |
Rated Voltage | AC 0.6/1.0KV DC 1.8KV |
Conductor Material | Tinned copper |
Insulation Material | XLPE |
Sheath Material | XLPE |
Color | Black or Red |
Advantage:
- This solar connector has an auto-locking structure to connect reliably
- We use only eligible PC material from resin supplier ,Material production included marvelous performance in the high low temperature,flame retarndant, antiultraviolet rays,taughted to harsh outdoor environment.
- The proven assembly process is simple, fast, safe and easy.
- Our connectors are in the lowest Contact resistance:0.4 mm

