High Bright 1000 Lumens Solar Pir Security Light With Motion Sensor

• Operation

The unit combine with polycrystalline silicon solar cells, rechargeable battery and

high efficient 80 SMD LEDs. Solar panel converts sunlight into electricity and lights

up for 45s when motion is detected at night. 6-8 Hours of exposure in sunlight will

provide enough electricity to light up 270 times, which is sufficient for overnight.

• Flexible Design

With the rotatable design, the solar panel and spotlights can be rotated to any

angle you desire. With a detection angle of 120°, the PIR sensor can detect human

motion from 16-26ft. AT NIGHT, when motion is detected, the security lights will

automatically turn ON and then turn OFF after 45s.

• Installation

Mount the solar panel

A. Place the solar panel in the desired location, adjusting the unit to best fit the surface.

B. Mark the hole location of the base, then set the solar panel aside.

C. Check that the marked areas are clear of obstacles such as cables and electrical

lines. Drill holes for the enclosed screws and plastic anchors.

D. Insert the plastic anchors then secure the solar panel in place with the screws.

Mount the lamp

A. Locate the unit six to eight feet above ground on a solid surface capable of

supporting the lamp and secure enough so that it will not move when exposed to

vibrations or wind. Then unit must be high enough to allow for motion detection

and light distribution.

B. Mark the hole locations of the mounting bracket, then set the lamp aside.

C. Check that the marked areas are clear of obstacles such as cables and electrical

lines. Drill holes for the enclosed screws and plastic anchors.

D. Secure the lamp in place with the screws.

Carefully route the power code of the solar panel to the lamp and connect it with

the cable from lamp.