Continuous Waste And Tyre Plastic Pyrolysis Recycling Plant For Furnace Oil And Carbon Black

Continuous Waste Tyre Pyrolysis Plant

Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 25-40 tons.

The Project Report

Raw Material can be processed:

Waste tyre, Used rubber, Waste plastic (PP,PE,PS, HDPE), Oil sludge,

Fuel as heating material :

Wood, Coal, Carbon briquette, Natural gas, Diesel, Fuel oil, Heavy oil

End product output ( waste tyre as feeding material )

Fuel oil : 40%-45%

carbon black : 30%-35%

waste gas: 3%-5%

wire: 10%-15%

Area Covered:

Machine covered: 300square meters

All including ( office, storage and ect): 600 square meters

Operation workers per shift :

3-4 people

Technical Specification

Performance Feature

1. Safety. We treat safety as the first important thing in production.

1) Two devices to avoid backfire in production: oil-water separator and anti-back fire device.

2) Vacuum device makes reactor working under ordinary pressure or negative pressure.

3) Temperature monitoring device to avoid excessive working temperature.

4) Pressure gage to monitor the pressure. If it goes above a certain level, the bell will alarm and the safety valve will release the pressure automatically.

5) Carbon black is discharged in a closed situation to avoid catching fire.

2. Environmental protection 10 ton used tire pyrolysis plant

1) The flue gas (caused by burning fuel to heat the reactor) will be purified and cooled by dust removal device, then can be released into air through chimney.

2) The procedure to remove carbon black is working under closed situation to avoid pollution.

3. Energy saving waste tire recycling pyrolysis plant

1) The flame path is designed as spiral so that the quantity of heat can be fully used.

2) The residual gas from pyrolysis is recycled to furnace burning to heating the reactor.

3) The insulation cover is formed by 3 levels: steel plate, rock wool and refractory cement. Excellent thermal insulation effect helps saving fuel.

4. Long service life

1) The material of reactor is Q345R boiler plate with 16/18mm thickness which is produced by Chinese well-known enterprise. The head of reactor and accessories are using one-piece molding shell cover rather than welded plate.

2) All cutting, rolling and welding works are finished by automatic machines.

3) We know quite well about the material quality and manufacturing process, that’s why we are confident in the service life of our products.

4) We also supply installation service, training service and one year warranty.

Applications
It is applied to extract fuel oil from waste tires, rubbers, plastics, soles, life garbage, cable skin and so on .
seperating crude carbon black, steel wires. the sync gas produced can also be recycled to use as fuel to heat reactor, considerable cost of tire plastic plant.