Waste tire/plastic pyrolysis plant for fuel oil is a new type of tyre oil treatment machine researched by our company through many times of experiment combined with the actual situation. The whole treating process is going under low temperature. It can effectively remove the tiny particles and Colloidal matter in the tyre oil, and meanwhile it can remove the odour of the oil, and finally makes the oil color looks clean and transparent and improve the economic value. It features high recycling rate, low costs of energy consumption, good oil processing ability. It is suitable for purification of tyre pyrolysis oil.

Input raw mateiral

The waste pyrolysis plant can process various kinds of waste plastic including pp , pe , ps , abs , rubber products ,tires to fuel oil , carbon black , steel wire.

Tyre pyrolysis is: the process of converting waste tyre rubber into industrial fuels like Pyrolysis Oil, Carbon Black and Hydrocarbon Gas.

Tyre pyrolysis involves subjecting Tyre to high temperature of 400 to 450 degree Celsius, in absence of oxygen. In case of oxygen is present tyre will start burning. During pyrolysis tyre breaks down into smaller molecules of pyrolysis oil, pyrolysis gas and carbon black. Pyrolysis is great a way of recycling waste plastics. This plant can also used for waste plastic recycling.

Output product from the waste pyrolysis plant

From waste tire pyrolysis plant, 4 kinds of products can be obtained: fuel oil, catbon black, steel wire, and incondensable gas. Fuel oil is widely used in industries, such as steel factory, heavy oil generator, cement factory, and boiler heating etc. Carbon black can be made into pellets for making new rubber products. Steel wire could be sold to the recycle station or steel mill for remelting. The incondensable gas is recycled to heat the pyrolysis reactor, saving energy.

Working proccess of the waste plastic pyrolysis plant

1. Put raw materials into reactor by auto-feeder, then heat the reactor. Do not stop heating the reactor when the temperature reaches nearly 250 degree Celsius, waste tyre will be transferred to oil gas.

2. The oil gas will be cooled by condenser to liquid oil then collected by oil tank.

3. The exhaust gas which can not be cooled to liquid oil will be recycled to heat the reactor. Smoke produced during processing can achieve national emission standard through dual desulfurization and dusting removal device.

4. After oil producing finished , give 3 hours for cooling the reactor,after that carbon black will be discharged automatically.