600W Wind Solar Hybrid System Controller 24V With Buck Constant Current Output
It is a PWM model wind solar hybrid controller. It with buck constant current output which is suitabel to work with LED or other device need constant current.
1. Features
If the battery is dead, the controller also can protect the wind turbine from over -speed
If he battery is dead, the controller can restart itself by sunshine
2. Parameters
Model |
YQHLNF04-02/24 |
YQHLNF05-02/24 |
YQHLNF06-02/24 |
YQHLNF06-03/24 | ||
Rated system voltage | 24V | |||||
Rated wind generator power | 400W | 500W | 600W | 600W | ||
Rated solar panel power | 200W | 200W | 200W | 300W | ||
Max. input voltage of solar panel | 80V | |||||
Battery low voltage disconnect | 20.4V | |||||
Battery low voltage reconnect | 23.0V | |||||
Equalize charging voltage | 29.4V | |||||
Equalize charging recovery voltage | 26.4V | |||||
Float charging voltage | 27.0V | |||||
Over load voltage | 35.5V | |||||
Over load recovery voltage | 30.0V | |||||
Wind dumpload rotate speed | 500R | |||||
Wind pole logarithm | 10D | |||||
Wind starting charging voltage | 10V | |||||
Wind dumpload voltage | 80V | |||||
Max. output power | 100W | |||||
1st output working model | PV control (light on: 6V, light off: 6V) (Adjustable) | |||||
Dump load control model |
Over rotate speed limiting, over voltage limiting, Over current limiting, PWM |
|||||
Wind charging technology | PWM | |||||
Solar charging technology | PWM | |||||
Display | LCD | |||||
Display content |
Battery: voltage, charging current, battery power |
|||||
Ambient temperature | -20℃~55℃ | |||||
Humidity | 35~85%, non-condensing | |||||
Standy by consumption | ≤1.2W | |||||
Protection type |
Battery: over-discharge, over-charge, anti-reverse connection |
|||||
Controller size | 162*148*85mm | |||||
N.W | 1.8KG | |||||
Optional function | RJ45 to RS232 or RJ45 to RS485 | |||||
Warranty | 2 years |
3. Application
Off grid wind solar hybrid system
Independent wind generation system
Streetlight system
Monitoring system