96V 4200W Notice Wind / Solar Hybrid Controller With 3KW Wind And 1200W Solar

This 4200W notice wind / solar hybrid controller is an intelligent control device which works for off grid wind and solar hybrid system with 3KW wind turbine and 1200W solar panel.

1. Features

1.1 Basic Functions

• Wind Turbine and Load Adaptive Impedance Matching, maximize energy utilization

There is internal resistance in Wind generators, batteries and loads. According to impedance matching principle, only when input impedance equals to output impedance, power utilization is maximal, get the maximum power

• Protect wind generator from over-revolution speed, over-voltage and over-current

Max revolution speed, max voltage and max current of wind generator could be set. Once the actual revolution speed, voltage or current over the set ones, PWM intelligent unloading will start automatically. That protect wind generator

• Intelligent limiting of batteries max current

Batteries maximum capacity could be set through this controller. According to the set maximum capacity, controller could calculate the maximum charging current. Then batteries will be protected

• Function of manual brake
• Wind charging manual switch
• Solar charging manual switch

1.2 Optional Function

• USB function
• RS232 interface
• RS485 interface
• Anemometer function

2. Parameters

• Remark 1: The parameters are marked in Red color can be adjusted by users according to different requirement of different battery
• Remark 2: If you have wind solar hybrid system project but don't know how to choose the controller, please share the information of wind generator and solar panel in the system to us, we will recommend right model for you

3. About the dumpload
The dump load is inside the controller because the wind generator power small than 5KW

4. Application
Off grid wind solar hybrid system
Independent Wind generation system