12V microwave sensor HNS112 special design for tri-proof lights by remote control setting

Special design for tri-proof fixtures, and improve the motion sensor stability and anti-interference.

Customized service: logo, model name, parameters like detection range, hold time, outout signal etc.

Features--

Structure and size:

Permanent ON/OFF function Press “ON/OFF” button, fixture goes to permanent on or permanent off mode, sensor is disabled. Settings(Remote control IR12) press “Auto”, “Reset” or “Ambient learn” to quit this mode. Dim +/- After desired brightness is locked down, if user wants to dim again reversely, just press the “Dim” button again and then lockndown the new brightness again. Sensor mode Press “Auto” button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off. Reset function Press “Reset” button, all settings go back to factory default settings. Factory default settings-- Sensitivity=100% Daylight sensor=disable Hold time=90s Twilight time=5min Twilight level=10%

Ambient learn

Press “Ambient learn” button, the latest surrounding lux value overwrites previous lux value learned, and set as the

daylight threshold. This feature enables the fixture to function well in any real application circumstance.


Test 3s

When“twilight level”set at 0%, it becomes ON/OFF control.
“Test mode”is for testing purpose only, for users to check the functionality and choose the desired
detection range. The sensor goes to test mode automatically after pressing this button.
Test mode defaulted settings--
Daylight sensor=disable
Hold time=3s
Twilight time=N/A
Twilight level=N/A

Users can quit this mode by pressing “ON/OFF”, “Reset”, or any button of “Hold time”. The sensor
settings are changed accordingly .

In this mode, after motion detected, sensor enters into a cycle of 3s on and 2s off (0.5s soft off + 1.5s off).

FAQ:

1. who are we?
We are based in Guangdong, China, start from 2016,sell to Domestic Market(50.00%),Northern Europe(10.00%),North
America(10.00%),Western Europe(5.00%),Eastern Europe(5.00%),Oceania(5.00%),Southern Europe(5.00%),South America(5.00%),Eastern
Asia(2.00%),South Asia(1.00%),Mid East(1.00%),Southeast Asia(1.00%). There are total about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
microwave motion sensor,motion sensor,microwave motion sensor module,sensor switch,occupancy sensor