D4i HNS153DL dali light sensor upgraded DALI 2.0 microwave motion sensor

Quick detail of dali light sensor

1, Self-contained “application controller”

2, Individual adjustment of parameters with configuration software.

3, Specially designed for UFO highbay fixtures, shoeboxes, wallpacks, etc., simple plug and play.

4, D4i approved, fully compatible with DALI Part 351 (Type A).

5, Settings via both DALI Bus and remote control.

Description of dali light sensor

Zhaga book18 receptable, specially designed for UFO highbay fixtures, shoeboxes,

wallpacks, etc., simple plug and play

Specification of dali light sensor

1, Detection range:

Sensitivity: 100% (0x64), 75% (0x4B), 50% (0x32), 25% (0x19).

2, T1 level:

This is the presetted max. brightness of the fixture after motion deteced.

3, T2 level:

This is the dimmed low light level you would like to have after the hold time in the absence of people.

4, T1 time:

T1 time is Hold-time that means the time period to keep the lamp on T1 level after motion detected.

5, T2 time:

This is the time period that the lamp remains at T2 level before it is completely switched off in the long absence of people.

6, Lux level:

Lux level means the daylight threahold to enable or disable the sensor function.

7, Send data way:

The sensor sends the signals of control gears, and the details are as below:

8, Send data address method:

This is the method of device addressing used by the transmitter, adapts different way to send DAPC or Recall scene

command based on required value.

9, Send data address value:

(1) Send data address method=0x02 [0, 63], default setting is 63 when data > 63;

(2) Send data address method=0x03 [0, 15], default setting is 15 when data> 15;

10, T1 Scene:

The sensor sends the value of scene instance [0, 15] under T1 status, default setting is 15 when data> 15;

11, T2 Scene:

The sensor sends the value of scene instance [0, 15] under T2 status, default setting is 15 when data> 15;

12, Receive occupancy sensor type:

The sensor receive the signal other sensors sent(24-bit event message frame).

(1) Bit7:event message enable

(2) Bit4: instance groups+instance types(event scheme 4)

(3) Bit3:device groups+instance types(event scheme 3)

(4) Bit2: short addresses+instance numbers(event scheme 2)

(5) Bit1: short addresses+instance types(event scheme 1)

(6) Bit0: instance types+instance numbers(event scheme 0)

(7) Other bit: reservation

13, Receive occupancy sensor short address:

Receive occupancy sensor type [bit2], the sensor can receive the equivalent signal of occupancy sensor short address

Range of validity [0, 63], default setting is 63 when data > 63;

14. Receive occupancy sensor instance number:

Bit0-Bit31: each bit corresponds to instance number, e.g. bit is 1, means that the sensor can receive the singal of the instance number

(bit is 1).

Why Choose Us:

FAQ:

1.CAN WE PRINT OUR OWN BRAND OR LOGO ON YOUR PRODUCTS ?

Yes, Of course. Will be our pleasure to be one your good OEM manufacturer in China to meet your OEM requirements.

2.HOW TO PLACE ORDER ?

Please send me your phone number and detailed address, then i will draft alibaba trade assurance contract online. And i will send your product to this address after payment.

3.DO YOU HAVE AFTER SALES SERVICE?

Our Items have 5 years warranty. If there is no man-made problem, we will replace or repair for your freely.