Model name: HNS211UV UV light AC microwave motion sensor switch
This model is a special design for UVC lamp, and protect the human to avoid UV damage. When human moves into the detection range of the sensor, the uv lamp will be off, and aftre hold time, no human movement, the uv lamp will be on to sterilizate timer. Importantly, Zero-cross point operation: specially protect the sensor relay against the in-rush current, secure the max. load and lifetime of the relay .
Advantage:
1. 5.8GHz C-band uv motion sensor, off/on and sterilization timer.
2. Zero-cross point operation, protect the sensor relay against the in-rush current,
secure the max. load and lifetime of the relay .
3. Remote control setting, easy operation, user friendly.
4. Sterilization time is on requirement.
5. RoHS compliant.
6. Customized service: YES
Parameters: Can be customized on requirement
1. Stand-by power: <0.5w.
2. Detection range up to 12m diameter.
3. Mounting height: 3~6m.
4. Operation temperature: -20 °c ~ + 70 °c.
Input | AC Input Voltage | 120-277V AC 60Hz for US / 220-240V AC 50Hz for EU |
Output | Signal | off / on |
Sensor Parameters | Hold time | T10s /1min/5min/10min/30min |
Detection range | 25%/50%/ 75%/100% | |
Sterilization timmer | 5min/15min/30min/ 60min/ disable | |
Mounting Height | 6m Max. | |
Detecting Angle | 150°(wall mounting) and 360°(ceiling mounting) | |
Operating Environment | Operating Temperature | -20℃-+70℃ |
Press“ Sensor Off”button, the sensor is disabled, and fixture goes to permanent on for sterilization.