1 Inch Small Rotary Speed Reducer, Self Locking Gear For Solar Powered Energy

Small Rotary Speed Reducer Description

Why using slewing drive solar tracking systems?

Due to the rotation of the earth, relative to the solar photovoltaic power generation system at a fixed location, the sun rises and sets every day in four seasons of a year, and the sun's illumination angle changes all the time, effectively ensuring that the solar panels can always face each other. The sun, the power generation efficiency will reach the best state. At present, the sun tracking control systems commonly used in the world all need to calculate the angle of the sun at different times of each day of the year according to the latitude and longitude of the placement point, and store the sun position at each time of the year in the PLC, microcontroller or computer. In the software, that is, by calculating the position of the sun to achieve tracking. The computer data theory is used, which requires the data and settings of the latitude and longitude regions of the earth. Once installed, it is inconvenient to move or disassemble. After each move, the data must be reset and various parameters must be adjusted; principle, circuit, technology, equipment Complicated, non-professionals cannot operate it casually.

Performance Parameters of SE series

SE1 Slewing Drive Specifications

Applications

Oblique uniaxial tracking
Since the vertical line of the solar panel tracked by the flat single axis always has an included angle with the sunlight, the included angle is larger in high latitude areas, which is not much higher than the fixed tilt installation efficiency. In order to improve the efficiency of the solar panel, the rotating shaft of the solar panel can be installed obliquely to reduce the angle between the vertical line of the solar panel and the sunlight.