SE1 Worm Gear Slew Drive, IP66 For Inclined Single Photovoltaic Tracking Station

SE1 Worm Gear Slew Drive Description

Tooth type: helical tooth
Bearing load: light load
Drive type: Motor drive
Diameter of rotary center: 40mm

Module: 5
Number of worm shafts: 1
Gear Ratio: 32: 1
Efficiency: 40%

Self-locking gears: YES
Weight: 6 kg

Slewing drives are widely applied in horizontal single axis tracking system, inclined single tracking system and dual axis PV solar tracking system, heliostat solar tower system, parabolic trough concentrated power station, solar dish tracker and linear fresnel thermal system, as well as marine crane, lift crane, timber grab, mining equipment, cutting equipment, aerial working platform, truck crane, drilling rig, turn table, automation line and so on.

Advantages

1. High backholding torque to improve the solar tracking system's safety

2. 360 degree rotating range

3. Enveloping worm drive inside

4. Multi tooth contact to ensure high load

5. Self-locking function

Performance Parameters of SE series

Remark: For more detailed dimensions and parameters, please refer to our sales drawings.

Applications

In order to improve the conversion efficiency of solar cells, the method of automatically tracking the sun is usually adopted, so that the solar panels are facing the sun. According to the determination, under the same environmental conditions, the power generation of an all-round automatic tracking solar photovoltaic power generation system is about 35% higher than that of a fixed solar photovoltaic power generation system. Especially for systems using monocrystalline silicon solar cell modules, due to the high price, it is hoped to obtain as much solar radiation as possible, and sun tracking can be considered.

There are three types of solar cell array tracking methods: flat single-axis tracking, inclined single-axis tracking, and dual-axis tracking. This courseware introduces single-axis tracking.