Product Details:

Quick Detail:

1. Its own characteristics-one-way light, no light diffusion, to ensure lighting efficiency.
2. The LED has reached 130-160lm / W, and there is still a lot of room for development. The theoretical value is 360lm / W. The luminous efficiency of high-pressure sodium lamps increases with power. Therefore, the overall luminous efficacy of LED street lights is stronger than that of high-pressure sodium lamps; (This overall luminous efficiency is theoretical. Actually, the luminous efficiency of high-pressure sodium lamps above 250W is higher than that of LED lamps. ).
3. The light decay is small, the light decay is less than 3% in one year, and it still meets the road requirements after 10 years of use, while the high-pressure sodium light decays, and it has dropped by more than 30% in about one year. Therefore, the LED street lights are designed in terms of power. Can be lower than HPS.
4. Long life: can be used for more than 50,000 hours, providing three years of quality assurance. The disadvantage is that the life of the power supply is not guaranteed.
5. Easy installation: no need to bury cables or rectifiers, directly connect to the lamp pole or nest the light source into the original lamp housing.
6. Reliable quality: All circuit power supplies use high-quality components, and each LED has separate overcurrent protection, so there is no need to worry about damage.
7. LED does not contain harmful metal mercury, which will not cause harm to the environment when it is scrapped.

Distribution Curve:

Installation Diagram:

1. Open the back board and back cover;
2. Connect the light wires and grid wires;
3. Insert the lamp pole into the light, lamp pole dia φ60mm;
4. Make sure the light is steady, lock the push board M10 Hexagon socket head cap screws, fix the light
   tightly onto the pole arm;
5. Close the back board, then back cover. Done;
6. Connect light power supply wire and grid wire according to above picture, blue to N, brown to L,
   yellow&green to E;

Applications: