Storage Energy 50Ah Prismatic LiFePO4 Battery 3.2V Rechargeable Lithium Battery

3.2V 50Ah continuous 3C discharge The square lithium iron phosphate battery is an aluminum shell battery with good heat dissipation performance, which is a good choice for equipment with temperature control system. 3.2V 50Ah continuous 3C discharge The positive and negative poles of the square lithium iron phosphate battery are designed with screw holes, which is very convenient for assembly and disassembly, eliminating many inconveniences in assembly and disassembly, improving efficiency and saving time.

High-power LiFePO4 (lithium iron phosphate) batteries for electric vehicles and energy storage systems, with the capacity of LiFePO4 batteries, with excellent performance, high stability and long life. The battery can be widely used in energy storage systems, EV, UPS, etc. It can be applied for Vehicle power supply, Storage system, etc.

Key Features:

1. Intelligent factory design, high performance consistency;
2. Square aluminum shell structure, and high-precision explosion-proof valve, high safety performance;
3. Low internal resistance, high discharge rate and stable discharge platform;
4. Design and customize according to customer requirements;
5. Long cycle life, the capacity retention ratio exceeds 80% after 3500 cycle at 1C/1C;
6. Green, the product conforms to GB, UN and ROHS directive.

7. The battery pack is safe, high temperature resistant, and has a long cycle life.

Parameters:

Test Conditions
1. Test Environmental conditions
Temperature: (25±2)℃
Relative Humidity: 15%~85%
Atmospheric Pressure: 86KPa~106KPa

2. Standard charge
The standard charge means charging the cell with charge current 0.5CA and sonstant voltage 3.65V at(25±2)℃, 0.05C cut off.

3. Standard Discharge
The standard discharge means discharging the cell with discharge current 0.5CA and cut off voltage 2.5V at (25±2)℃. If required, the battery can be discharged at 1.0CA constat current to a cutoff volatge of 2.5V.

Dimensions

Applications:

Transportation:
Battery for shipping should be packed in boxes with the condition of half charged (30%~50%SOC). The Violent vibration, impact extrusion, sun and rain should be prevented during shipping. The battery is suitable for cars, trains, ships, aircraft and other transportation vehicles.