Wind Turbine Grid Tie Inverter 1500W Solar Wind Inverter Wind Inverter

Description:

The wind turbine grid inverter has a built-in bridge rectifier and unloading controller that maintains the speed of the wind turbine so that the wind turbine’s voltage is always within the rated operating voltage range of the inverter. It also has a high voltage protection function. When the wind is too large, the unloading control system cannot maintain the output voltage of the wind turbine, and the controller will disconnect the wind turbine.

The wind energy grid-connected inverter can directly convert the wind energy of the connected fan into electric energy and upload it to the home grid without accessing additional equipment. The inverter output can be directly connected to any socket in the home to complete the connection of the entire system. The inverter controls the energy generated by the fan, adjusts the voltage frequency and voltage phase, and the pure sine wave of its output is successfully integrated into the grid.

Product appearance:

The left end of the inverter has five terminals, three red terminals are used to connect the three-phase power of the fan, and two black terminals are connected to the unloading resistor. There are also 4 indicators, 3 green indicators and 1 red indicator. When a grid access is detected, the three green lights begin to cycle. This indicates that the inverter is operating under normal conditions. The blinking speed of the indicator light is calculated based on the output power. The higher the output power, the faster the speed. If the grid input is not detected, the red indicator light will be on, and the inverter will not output power. This is called “island protection”.

Recommendation: When installing the first inverter to the grid, it is recommended to operate by a licensed electrician.

Product Details: