Direct acting solenoid coil hole 14.2mm high 33mm DIN43650A DC24V for pulse jet valves series

Direct operation can only be achieved in valves incorporating almost frictionless, short stroke, steel spools without seals; typically these include directional control valves, which are widely used in America. Although these devices offer relatively fast response times and can be switched at any air pressure, they are relatively large, expensive to manufacture and require additional electronic control equipment before they can function.

Specifications:

Notes: please tell me the voltage you need ,if no remark ,
you will receive 24V DC .

The use of other materials is possible upon special agreements. All coils are rated to class F and to IP 65.
The coil is designed and constructed in accordance to EN 60204.1 and VDE 0580 and it is suitable for industrial ambient conditions. For use in special ambients with high humidity, we suggest the sealed or thermoset version.

Note :

Drawings:

Application :

This kind coil is fastened to the plunger guide tube by means of a knurled nut for ease of change over without interrupting the pneumatic circuit .
The suggested interface dimensions of the valve body are shown on the right side .
Any change to the prescribed dimensions can effect the performances of the solenoid operator .

Warranty Notes :

Quality Standards : The company for the products are brand new original products, no second-hand and refurbished products, or leave a compensable ten and return the full amount , but the buyer due to our purchase of model error is not responsible for returns, another of the company's sales of products enjoy one year from the date of shipment quality assurance , according to the original quality standards , during warranty with product problems , need confirmation testing by the manufacturer , the supplier to be solved , the demand side due to storage , use, poor maintenance caused by lower-quality product , and not raise objections