Slurry Filtration Belt Filter Wear Belt Vacuum Box Support Large Capacity
The Sludge Dewatering Belt Filter also called vacuum belt filter is made of either stainless steel or carbon steel based on customized requests and material condition, which makes it a durable and long-lasting filtration system.
The filtration area of the system ranges from 10-1000 m2, making it suitable for a wide range of applications.
It is important that the belt press filter has an effective belt washing section so that blinding does not decrease the permeability of the belt. Solids recovery is directly related to filtrate quality and thus the filter media and process arrangement must satisfy the desired cake and filtrate qualities. Dry solids content is a measure of the degree of dewatering. The degree of dewatering is increased when the belt speed is decreased. Lowering the belt speed reduces the capacity of the process.
Vacuum Box Lfting Device | Vacuum box is assembled by sections, each section is connected with filtrate pipe to form a vacuum filtrate collecting system. With a lifting device of vacuum box, it is more convenience for wear belt replacement. |
Tracking Device | Adopt cylinder or bellows to adjust the tracking of cloth automatically by switching the tracking angles. It can ensure the normal operation of cloth. |
Tension Unit | By adjusting the tension of rubber belt to ensure the friction force of belt and no tracking happened. |
Washing Device | Adopt countercurrent and concurrent spraying devices, which can switch to concurrent washing and countercurrent washing according to differently slurries and process requirement, which can washing the materials more completely. |
Description | Specification |
---|---|
Product Name | Horizontal Vacuum Belt Filter |
Filter Cake Wash | Counter-Current Wash |
Material Of Construction | Stainless Steel Or Carbon Steel |
Vacuum Source | Vacuum Pump |
Operation | Continuous |
Filtration Area | 10-1000 M2 |
Drive System | Variable Speed Drive |
Control System | PLC |
Application | Solid-Liquid Separation |
Customized design |
Equipment supply |
Installation and commissioning |
Operator training and process optimization |
Routine maintenance and troubleshooting |
Spare Parts and consumables |
Q: What is the brand name of this belt filter?
A: The brand name of this belt filter is UNIVEE.
Q: Where is this belt filter manufactured?
A: This belt filter is manufactured in China.
Q: What are the dimensions of this belt filter?
A: The dimensions of this belt filter vary depending on the specific model. Please refer to the product specifications for detailed information.