Infiniti Digital Driver Solvent Inkjet Printer Spare Parts MCDC506 Servo Motor​

Item Details

1. MCDC series full digital dc servo driver is a low cost all closed loop full digital dc servo driver based on 32-bit DSP.

2. It includes three feedback loop (position loop, speed loop and current loop). position, speed and torque mode are available

3. The control interface is compatible with stepping motor, you can update your stepping drive system to DC servo system without much changes

4. MCDC series is small size, easy installation, high reliability, simple debugging

5. Suitable for driving at voltage DC24-60V power 200W in the dc servo motor

MCDC506 all-digital DC servo drive system adopts high-performance digital signal processor
(DSP) and integrated circuit, and come out to be a cost effective product with simple circuit, high integration,easy operation, and strong practicability. MCDC506 provide three feedback loops: position loop, velocity loop and current loop. Three work control mode: position, velocity and torque. PSV5060-DC matches with DCservo motor under 50V and 200W.

Specifications

Input DC voltage range 24—50v(standard);
Continuous Output power:200W;
Continuous output current:6A 32KHz PWM;
Overload output current: 18A(3s);
Protection:
Over current initiated peak value: 30A±10%;
Overload I2T current initiated value: 300% 5s;
Overheating initiated value: 80℃;
Over voltage initiated value: 65 v;
Under Voltage initiated value: 18V;
Maximum pulse input frequency:300K;
Maximum RS232C speed: 19.6Kbps (an extra transfer interface required);
Working environment:
No dust, no oil mist and no corrosive air;
Working temperature: 0-+50℃;
Storage temperature: -20--+80℃;
Humidity:40-90%RH;
Cooling method: natural air cooling and forced air cooling;
Dimension:118 x 76x 35 mm
Weight: about 500g

Features

Position control: light isolate input PULSE/DIRECTION;
Speed control: input simulate 0-3.3V voltage signal (speed input by Pos.ff);
Torque control: input simulate 0-3.3V voltage signal (torque input by Pos.ff);
Width of current loop (-3dB) 2KHz (standard);
Width of velocity loop: 500 Hz (standard);
Width of position loop: 200 Hz (standard);
Perfect protection against overload, I2T, over-voltage, over current, overheating, short circuit, circuit
interruption, chip damage;
Green light for on, red light for protected mode or offline.

Customer cares

Product Display