1600mm Manual Vinyl Electrical Cold Wide Format Laminator With Two Roller

Parameter of Electric Cold Laminator

Product feature of Electric Cold Laminator

1. It is a wide format laminator, can process items that are up to 63 inches width.

2. The laminated paper can reach effect of waterproof, anti-corrosion,anti-ultraviolet erosion.

3. It is equiped with foot peda.This makes easier operation.

4. It is cold laminator without heating. can be used to mount boards pvc,paper,photo.

5. It is equiped with stand.

Series cold laminator is a type of electrical cold laminator with the characteristics of simple structure, economical and practical. Foot switch controls are humanized, and operation processes are simpler and more convenience, so it can be widely used in more industry such as exhibition industry, advertisement industry, ink-jet printing industry, photo studio, and etc. With options of adding let off mechanism for coiled material and rolling mechanism for finished product, it is applicable to use no-leave paper cold laminating film, so as to save working place and use manpower.

Application

After printing equipment. Available for photographic, Ad. Shop and copy shop to do lamination work, adding a protective layer on books cover, photographic, color pages, documents, charts, drawings, indoor advertising products, etc.

Operation

The operation is the cold laminating machine is driven by the manner in which the device is running. Cold laminating machine operation, there are two: one is the manual, is another electric type. The manual type refers to the cold laminating machine during the actual operation, the user needs to manually control process operation including Lengbiao object out the need for user intervention. Electric type, some operations are performed by the device is done automatically.

Plastic shaft pressure adjustment

1. Rotary machine on both sides of the box on the regulator handle, the upper and lower two-axis separation will be ready for Framed the diagram and Lengbiao of film placed between the two axes at the same time, the rotation regulator handle, so that the upper shaft parallel downward movement, when turning the regulator handle surprise easily, said two-axis has been in contact with, then please do not continue down the pressure, simply regulator tight zone can handle gently. If you continue to pressure, will make the shaft resulting variant, so that operation failed.

2. Pressure adjustment between the two axis and cold laminating film, exit from between the two axes. Ready for the film mounted.

electric and manual cold laminator

electric cold laminator machine

electric cold laminator

Note

1. cold laminating machine installed in a special bracket on a smooth, solid workbench. For a mounted film dedicated platform, then mounted on the edge of the film machine height height of less than 5 mm, width 1600 mm, and the length of more than one meter.

2. will need mounted film or empty take the Lengbiao machine materials on the cold iron roll film before entering face down on the cold laminating machine after coating. Adjust cold laminating machine regulator hand wheel lift on the rubber roller, then piercing the material two rubber roller 10 cm.

3. For mounted film needs to be cold laminating film piercing cold laminating machine rubber roller 10 cm, on supplies above, film and supplies both sides of the channel must be aligned.

4. adjust the position of the supplies in the platform, so that both ends of the surface in the cold laminating machine tightness is consistent, then adjust the regulator hand wheel on the machine, to lay down on the rubber roller, transferred to the air-way position. Both ends of the pressure must be consistent.

Product Photos