Rice Husk Straw Grass Bioamss Pellet Mill 420 508 678

Description :

Bioamss Pellet Mill is used to press the material into high density cylinder pellet with easy transportation and storage . The working priciple :
When the powders with different particle sizes are guided by the scraper in the pressing chamber into the pre-compression area between the actively rotating ring die and the driven rotating pressure roller, the material has a certain degree of looseness, and the material is squeezed by the ring die and the pressure roller so as to High density particles are formed.Biomass Pellet mill is divided into biomass and animal feed pellet machine according to different raw material .

Simply to say ,the ring die moving drive the roller shell , the raw material is extruded by ring die and roller shell into high density pellet .

Main technical parameters :

Quick advantage :

1.Biomass pellet mill widely used to make pellets from light substance, such as wood chips,rice husk, sawdust, straw, pasture, chrysanthemum, palm leaf and so on;

2. The feeder’s especial structure makes materials conveyed evenly, it is specially designed for pellet of light substance with the density of 0.3-0.6g/ cm3;

3. It is with magnet and over load protection system, which protects the machine during production;

4. Feeder has a variable speed controller to meet different outputs requirements;

5. It makes gear directly-connecting as the driver, and is with quick-release die fixed by clamps, which will increase the output by 15% when compared to a machine with a belt conveyer;

6. The bearing and oil seal in the main drive are imported FAG /NSK to ensure highly-efficient, stability and high quality;

7. The alloy steel die is with international advanced equipment and techniques, and has long service life, and can make slippery pellets of the highest quality.

The structure of biomass pellet mill :

1. Feeder&Observation Hole:
Variable Frequency speed control, observation window to inspect the pelletizing at any time .

2. Forced feeder:
The average quantity is fed to the main engine at a constant speed.

3.Pelleting Chamber:
Insist of two rollers, ring die, and fixing parts.

4. Safety device :

the safety pin and switch is equipped to protect main shaft and stop the electric when iron go into the chamber .

Why us :

A.Good reputation

Because of the good quality and credit,our company are with good reputation both at home and abroad.

B. Factory direct supply

This ensure the competitive price available and brand care.

C. Advanced technology adopted

American CPM advanced technology with rich experience on site for installation and debugging,which has the good ability to provide with aftersale service.

D. Best and reasonable structure design of the pellet mill

This make sure the durability of the machinery running.

Gear drive of the bioass pellet mill which make the pellet machine stronger for making the wood pellets.Compared with belt drive,with lower consumption for the same capacity.