1000 Base-Fx Sfp Rj45 Ethernet Managed Media Converter

The SPM-ETX series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.

Features of SFP Media Converter

● Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX

● Provides DIP switch for LFP function (Disable / Enable) setting

● 10/100/1000Mbps Ethernet

● 10/100/1000 BASE-T/TX electrical port

● 1000 BASE-SX/LX optical port

● Electrical port supports Auto-Negotiation for 100Mbps or 1000Mbps, full duplex or half duplex data.

● Optical port supports 1000Mbps full duplex data

● Automatic MDI/MDI-X crossover

● Distances up to 2km for Multi mode;Up to 120km for Single mode

● Voltage transient protection on all power and signal input.output lines provides unconditional protection from power surges and other voltage transient events

● No in-field optical adjustments required

● LED indicators for easy network diagnostics

Applications

● Access Control Systems

● Building and Environmental Control Systems

● Tamper Switch

● 10/100/1000 Mbps Ethernet Media Converter

● High Speed Computer Links

Technical Specifications

Connection Diagram

Ordering Informations