MachineU > China Products > Electrical Equipment & Supplies > Power Supplies > Power Accessories
24 Cores Splitter Fiber Optic Cable Joint Closure For Telecommunication Subscriber Loop
24 Cores Splitter Fiber Optic Cable Joint Closure For Telecommunication Subscriber Loop
24 Cores Splitter Fiber Optic Cable Joint Closure For Telecommunication Subscriber Loop
24 Cores Splitter Fiber Optic Cable Joint Closure For Telecommunication Subscriber Loop
24 Cores Splitter Fiber Optic Cable Joint Closure For Telecommunication Subscriber Loop
24 Cores Splitter Fiber Optic Cable Joint Closure For Telecommunication Subscriber Loop
Specifications
Model Number :
SPFC-PH-XXM-4/4E
Packaging Details :
500*510*58/8PCS; 28.5KG/8PCS
Net weight :
3.5kg
Size :
470（L）*240(W) *120 (H) mm
Installation :
Aerial, duct and buried
Cable diameter :
∅10-∅22
Max Capacity :
36 cores single
PLC Splitter Capacity :
1:32/2:16 Max
Description

24 Cores Splitter Fiber Closure 4 IN 4 OUT Mechanical Splicing

The product provide with 8 fiber cable in-out round ports and the cable diameter is from Ф10-Ф22. It can be used in aerial, duct and direct buried application. This product is made from the high-quality and with the mechanical sealing structure filled with the sealing material. The external component and fastening piece are all made from the high-quality stainless steel. It can be opened after sealing.

24 Cores Splitter Fiber Optic Cable Joint Closure For Telecommunication Subscriber Loop

Applications

● Telecommunication subscriber loop

● Fiber to the home(FTTH)

● LAN/WAN

Specification

Item Parameter
Type SPFC-PH-XXM-4/4E
External Size 470(L)× 240(W) × 120 (H) mm
Net weight 3.5kg
Cable ports four cable entry port on each end
Way to install Aerial, duct and buried applications
Cable diameter

∅10-∅22
Capacity of splice tray 24 single fiber
Max Capacity of Splice Tray 8
PLC Splitter Capacity Optional support 1:32/2:16 Max type E
Sealing structure Sticky cincture
Work Temperature -40°C ~+70 °C
Optical fiber winding radius ≥40mm
Extra loss of fiber tray ≤ 0.01dB
Fiber length left in tray ≥1.6m
Max Capacity Fiber capacity: single:36cores
Lateral pressure-resistance ≥2000N / 10cm
Shock-resistance ≥20N.m

Operations

● Choose the cable loop with proper outer diameter and let it go through the optical cable. Peel the cable , take off the outer and inner housing, as well as loose contract tube, and wash off the filling grease, leaving 1.1~1.6mfiber and 30~50mm steel core.

● Fix the cable pressing card and cable, together with cable reinforce steel core. If the diameter of the cable is less than 10mm, first bind the cable fixing point with adhesive tape till the diameter has reached 12mm, then fix it.

● Lead the fiber into the melting and connecting tray, fix heat contract tube and heat melt tube to one of the connecting fiber. After melting and connecting the fiber, move heat contract tube and heat melt tube and fix the stainless (or quartz)reinforce core stick ,make sure the connecting point is in the middle of the housing pipe. Heat the pipe to make the two into one. Put the protected joint into the fiber-laying tray.(one tray can lay 12 cores)

● Lay the left fiber in the melting and connecting tray evenly, and fix the winding fiber with nylon ties. Use the trays from the bottom up. After all the fiber has been connected, cover the top layer and fix it.

● Position it and use the earth wire in accordance with the project plan.

● Sealing the cable retainer nearing the inlet of splice closure and the joint of the cable rings with sealing tape. And close the unused inlets with plugs, with exposed concave parts of the plug sealed with tapes. Then put sealing trips into the sealing groove on the sides of the shell and grease the concave part of inlet of the body between the two parts of the shell. Then close the two parts of the shell and tighten it with stainless steel bolts. The bolts should be screwed tightly with balanced force. according to the laying requirement, position and fix the hanging tool .

Ordering Information

Model Description Size(mm) Package Weight/carton
SPFC-PH-24M-4/4E Fiber Closure Horizontal type support Splitter 24 Cores Max , 24 Cores Splice Tray 4 IN 4 OUT Mechanical Splicing without Splitter,support 1:16/1:8(2PCS) Max type E

470*240*120

500*510*58/8PCS

28.5KG/8PCS
SPFC-PH-36M-4/4E Fiber Closure Horizontal type support Splitter 36 Cores Max , 24 Cores Splice Tray 4 IN 4 OUT Mechanical Splicing without Splitter,support 1:32/1:16(2PCS) Max type E
SPFC-PH-48M-4/4E Fiber Closure Horizontal type support Splitter 48cores(24 duplex SC adapters can be installed) 24 Cores Splice Tray 4 IN 4 OUT Mechanical Splicing without Splitter,support 1:32/1:16(2PCS) Max type E
Product tags

how to install a cable splitter

,

8 way cable splitter

,

two way splitter cable
Send your message to this supplier
Send Now

24 Cores Splitter Fiber Optic Cable Joint Closure For Telecommunication Subscriber Loop

Ask Latest Price
Product Detail
Model Number :
SPFC-PH-XXM-4/4E
Packaging Details :
500*510*58/8PCS; 28.5KG/8PCS
Net weight :
3.5kg
Size :
470（L）*240(W) *120 (H) mm
Installation :
Aerial, duct and buried
Cable diameter :
∅10-∅22
Contact Supplier
24 Cores Splitter Fiber Optic Cable Joint Closure For Telecommunication Subscriber Loop
24 Cores Splitter Fiber Optic Cable Joint Closure For Telecommunication Subscriber Loop
24 Cores Splitter Fiber Optic Cable Joint Closure For Telecommunication Subscriber Loop

Shenzhen Sopto Technology Co., Ltd

Active Member
6 Years
guangdong, shenzhen
Since 2006
Business Type :
Manufacturer, Trading Company, Seller
Main Products :
Fiber Optic Transceiver, Fiber Optic Cable, Fiber Optic Connectors
Employee Number :
350~400
Certification Level :
Active Member
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Optical Fiber Splice Closure
MachineU China Products Electrical Equipment & Supplies Power Supplies Power Accessories
Contact Supplier
Submit Requirement