Small Engine Petrol Generator Ignition Coil For Robin EY20 EY28 Spare Parts Igniter
Overview
1. Application supply for generator Ignition coil Robin EY20 EY28
2. Using temp.:-20℃--80℃, Storage temp.: -40℃--100℃
3. Packaging Details: 100pcs in 1 carton
4. Single gross weight: 0.31kgs
5. The installation size: EY20 30mm/1.18in
EY28 57mm/2.24in
6. We can supply the generator ignition coils for follows:
Parts for Yamaha Series | ET950, ET2700, ET6600, ET4600,ET650, etc. |
Parts for Robin Engine | EY20 EY15, EY18, EY28, EH12, EX13, EX17, EX21 |
Parts for Konler, Briggs&Stratton | 2kw-15kw all ignition coil |
Parts for Honda | GX120, GX160, GX200, GX240, GX270, GX340, GX390, GX440, GX25, GX35, GX100, GX110, GXV135, GXV160, GCV160, GX620, GX670 |
Parts for diesel generator and engine | 152F, 168F, 170F/A,178F/A,186F/A, 188FKAMA186F, etc |
Parts for petrol water pump | 2 inc, 3 inch, 4 inch |
Electrical Specification of Robin EY20 EY28
Note: The following parameters are tested in the flywheel magnetic field strength of not less than 1700 gauss, flywheel and igniter gap of 0.4 ± 0.1mm, three-pin spacing of 6-6.2mm under the conditions of the test.
1. The lowest continuous ignition speed of the igniter: ≤250rpm.
2. The ignition angle of the igniter at 3000rpm is 25°±1°.
3. Igniter at 3000rpm: secondary output voltage ≥23KV.
4. 3000rpm to provide the oil alarm working voltage peak ≥ 11V.
5. Grounding of the ignition off wire should turn off the ignition within 1 second.
6. In the three needle pole distance of 9-9.5mm, the speed of 3000 rpm can be continuous ignition without breaking fire.
7. The igniter in the high-voltage output open-circuit conditions, with 3000 rpm speed in the above conditions after running for more than 5 minutes, its performance meets the above requirements.