Perfect for imperfect subfloors. This is the other trademark of SPC rigid core luxury vinyl flooring.rigid core is specially designed for these types of situations, engineered to be installed over any existing hard surface, including tile.
Thickness | 3.2mm ~ 6.0mm | ||
Wear Layer Thickness | 0.3mm ~ 7mm | ||
Specification | 230x1220 mm | 230x1520 mm | Customized |
Raw Material | 100% virgin material | ||
Underlayment | EVA,IXPE,Cork etc. | ||
Certificate | CE / S.G.S / ISO9001 / ISO14001 | ||
Surface Treatment | UV coating | ||
Design | Wood grain | Flat grain | Deep embossing grain |
Impact grain | Hand-scraped grain | Light embossing grain | |
Advantage | Formaldehyde Free | Waterproof | Strong Stability |
Varieties Design | Non-Slip | Fire proof | |
Installation | Easy Installation | DIY installation | Unilin Click |
Application | Indoor area,Decoration material,Office,Household,Hotel,Shoping center,School,Hospital,Residential and Commercial.... |
,
Structure | Features |
UV Layer Wear Resistance Layer | Anti color fading |
Easy to keep clean | |
Protect the decor design | |
Printed Decoration Foil | Durable, resilient |
High resolution print | |
Real wood look | |
SPC Core Layer | Waterproof |
Patented Uniclick Lock | Easy to install |
Foam Underlay Layer | The foot feels comfortable |
Lower installation time |
Color Display
wood texture
marble texture
carpet texture
Installation steps
1. Before installation, it is recommended to spread floor film, which can make better feeling of feet and prevent the noise generated between the ground and the floor by small grains of sand. Put the first floor from the left corner of the room.
2. To prevent the natural expansion of the floor, 0.4 cm gap should be reserved between the wall and the floor.
3. When installing the first and second floor, insert the convex damage of the short side into the groove of the first floor,Continue to use the above method to install other floors...
4. When installing the last piece of the first row, you need to take the remaining part of the floor measure-ment first, and note that the floor needs to be measured in reverse.
5. Finally, use the art knife to force the floor surface, break it by hands easily, then install the last floor of the first row.
6. Start installing the second row,When installing the second floor, insert the convex of the short side into the groove of the previous floor, and gently insert the convex of the long side into the corresponding floor groove.
7. Use a rubber hammer when there are gaps.
8. Recommended installation method reference picture.
9. Finally, the same method can be used to install other floors in the room to ensure that necessary expansion gaps are left between all fixed vertical planes in the room, including doors, walls, cabinets and other fixed objects.