Drainage System Perforated Cylinder Customized Metal For Food Filtration Producing
Commonly Perforated Carbon Steel Types
Commercial Steel (HR, CR, GALV) A low cost steel that has good drawing, forming, and welding qualities, moderate strength, but is subject to strains, fluting, and breaks due to aging. To reduce the affects caused by aging, Drawing Steel is recommended.
According to the application, we have common steel type as follows
Element percent | ||||||
Steel Type | 201 | 202 | 304 | 316 | 430 | 409 |
NI | 1.246 | 4.079 | 8.03 | 10.0-14.0 | ≤0.60 | |
C | 0.073 | 0.055 | 0.042 | ≤0.08 | ≤0.12 | ≤0.08 |
Si | 0.364 | 0.416 | 0.46 | ≤1.00 | ≤1.00 | ≤1.00 |
Mn | 9.282 | 7.483 | 1.03 | ≤2.00 | ≤1.00 | ≤1.00 |
P | 0.0329 | 0.0393 | 0.044 | ≤0.045 | ≤0.040 | ≤0.045 |
S | 0.0051 | 0.0032 | 0.004 | ≤0.030 | ≤0.030 | ≤0.030 |
Cr | 14.912 | 15.958 | 18.35 | 16-18 | 16-18 | 10.5-11.75 |
Mo | 2.0-3.0 | |||||
Cu | 1.46 | 1.494 |
Test Material | 201 | 202 | 304 | 316 | 409l |
Tensile Strength | ≥535 | ≥520 | 687 | ≥520 | ≥360 |
Yield Strength | ≥245 | ≥205 | 287 | ≥205 | ≥ 175 |
Extension | ≥30% | ≥30% | 0.525 | ≥35% | ≥25% |
Hardness (HV) | <253 | <253 | 187 | <200 | <175 |
As for the punched module, we have free module cost as follows
Diameter (mm) | 0.5 | 2.4 | 2.4 | 2.6 | 3 | 3 | 3.175 | 4 | 4.2 | 3.2 | 3.2 | 5 | 6 |
Distance (mm) | 1 | 4 | 6 | 6 | 5 | 8 | 6.35 | 6 | 6 | 5 | 5.5 | 8 | 8 |
Forwarder is manufacture with full experience, so we can save cost on the module cost, save time on delivery, especially save reputation on fault supplier. Warmly welcome inquiry with detail speciation about Welded Punched Tubing Customized Metal High Pressure Prisice Open Rate.