TP20A Series High frequency 100W Planar Transformer,High Frequency Power Transformer,Max. thickness 7.4mm
This is a matrix of the winding configurations. They are ideally suited to hand between 75-100W of power supply on DC-CD converters application.
FEATURES:
- Power Rating Up to 100 Watts
- High Efficiency
- Footprint 20.12 mm×18.50 mm
- Lower Profile of 7.4 mm
- High Isolation (operational) 1500 Vdc
- High Frequency 200 kHz-700 kHz
- Operating Temperature -40℃ to +125℃
- Very low Leakage Inductance (less than 0.2% for un-gapped cores).
- Cost effective and competitive prices.
- Minimum Electromagnetic Interference (EMI).
- High Creepage and Clearance distances between primary and
- Applicable to all SMPS topologies.
- Various mounting and terminals options (Horizontal, Vertical, Through-holes, SMT, Pins, Flying-cables and more).
- Specially designed heat-dissipating Clasps.
- Low-profile planar transformer
- High-power planar transformer
- High-frequency planar transformer
- PCB planar transformer
- Planar switching power transformer
- Off the shelf SMT planar transformer
APPLICATIONS:
- High efficiencies,high power density of 400 watts per cubic inch DC/DC converters.
- For forward, full-bridge, half-bridge and push-pull DC/DC converters.
- Input voltages between 18V and 75V, and output voltages from 18V down to 1.2V DC/DC converters.
- Telecommunications, industrial control systems,
- Automotive and heavy equipment vehicle systems.
TECHNICAL INFORMATION:
- The inductance is measured between Pin (2-5) at 100 kHz, 100 mVrms
- The leakage inductance is measured in primary winding Pin(2-5) with secondary winding shorted.
- All specifications typical at TA=25℃±5℃.



