Product Name: 9293-059-50 Welch Allyn ECG wire/cable

ECG CABLES AND ACCESSORIES NIBP CUFF.pdf

1.About Us

Our company mainly designs and produces various monitor compatible accessories such as: SpO2 interface cable, ECG/EKG cable and accessories, BP products, IPB adapter catable, disposable IBP transducer and and all series of supporting connectors, etc.

Our company adheres to the business philosophy of "integrity creates quality, quality wins the market", uses modern management methods, efficiently produces high-quality products, and provides professional services that satisfy customers! Friends from all walks of life are also welcome to visit, guide and negotiate business.

2. How to use the ECG cable
Using an ECG (electrocardiogram) cable involves the following steps:

1. Patient: Ensure the patient is in a comfortable position with the chest and extremities exposed for electrode placement. It is important to follow proper hygiene protocols and clean the patient's skin when necessary.

2. Connect the electrodes: Connect the electrodes to the patient's skin according to the desired lead configuration. Common lead placements include extremity (right arm, left arm, right leg, left leg) and precordial (chest) leads. Follow the manufacturer's instructions or standard lead placement guidelines for accurate ECG recordings.

3. Connect the ECG cable: Take out one end of the ECG cable and connect the corresponding connector to the electrode. Make sure each wire makes a safe and correct connection. Connectors can be color coded or marked to match specific lead placement.

4. Connect the ECG machine or monitor: Connect the other end of the ECG cable to the ECG machine or monitor. The connector on the cable should match the input port on the machine. Make sure a secure connection is established.

5. Turn on the ECG machine or monitor: Follow the manufacturer's instructions to turn on the ECG machine or monitor. Wait for it to initialize and make sure it is ready to receive and display ECG signals.

6. Verify signal quality: After the connection is complete, check the ECG machine or monitor to verify that it is receiving a clear and stable ECG signal. Make sure the electrodes are connected correctly and that the cables are not tangled or causing any interference.

7. Start an ECG recording: Depending on the ECG machine or monitor, there may be specific buttons or commands to start an ECG recording. Initiate recording according to the manufacturer's instructions and ensure that the patient remains still during recording.

8. Monitor the ECG waveform: After starting the recording, monitor the ECG waveform on the machine or monitor display. Observe and analyze the ECG waveform for any abnormalities or irregularities.

9. End ECG recording: When the desired recording duration has elapsed, follow the manufacturer's instructions to stop the ECG recording. Make sure the patient's electrodes and cables are safely and comfortably disconnected.

10. Clean and Store ECG Cable: After use, clean the ECG cable according to the manufacturer's guidelines. As mentioned in previous replies, coil and store cables properly to prevent damage or tangles.