Compatible Siemens Reusable Spo2 Sensor 10 Pin Adult Silicone finger

Compatibility:

Our products advantage:

1.Our chip Signal accurate and stable Ensure product quality

2. Patient side: medical silicone material

Comfortable medical silicone pad, good shading effect and no leakage
Safe, non-toxic, soft and comfortable

3. Wire: Made of medical-grade TPU material, the wire is soft and tensile and easy to handle.

4. Double shielded cable: Multi-layer wire shielding, strong anti-interference ability
Stable signal transmission, threaded, tensile and bending resistant

5. Equipped with high-quality connectors

The stand connector is accurately positioned and difficult to remove from the monitor

6. Quality: 1 year warranty and tested by monitor and simulator

Specifications
Basic Unit Specifications:
- Rating: 3.75V+/-10%
- Safety category: BF type
- Waterproof category: IPX2
- Service life: 1 year
- Shelf-life: 3 years

Warning

1.Sensors are designed for use with specific monitors.

2.The operator is responsible for checking the compatibility of the monitor, probe and cable before use ncompatible components can result in degraded accuracy and performance.

3.Do not assess the sensor’s accuracy by using a functional tester or oximetry simulator.

4.Consult the operation instructions for the equipment concerned and the related accessories before operating equipment to ensure their compatibility.

5.Portable and mobile RF communications equipment can be affect equipment.

6.Disposal of the sensor shall comply with local reg

Cleaning the equipment

1.Clean the sensor and its connecting cable with warm soapy water.

2.The probe and the cable must be cleaned using a soft cloth moistened with soapy water or 70% isopropyl alcohol. Carefully avoid damaging the surface of the visual indicator and the detector. Allow the probe and the cable to dry thoroughly before use. Do not use any abrasive agents or chemical product except 70% isopropyl alcohol

3.Do not irradiate, autoclave, soak or immerse the probe in any kind of solution. Keep the probe clean and dry.

4.The average life expectancy of a SpO2 sensor is more then a year under the conditions of use advocated in these operating instructions.