Spot Air cooler is drawn into the spot cooler through grilles on the front and rear of the cooler. Hot damp air is expelled out of the top of the cooler, and cooled dry air comes out of the two outlets on the front of the cooler. Moisture removed form the surrounding air is collected in the condensate tank, which is at the bottom of the cooler.
Meanwhile, spot air cooler system includes everything needed for a single point cooling station that offers a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. With the turn of a knob , you can select a precise and comfortable temperature in the room. simply roll it in, plug it in, turn it on and set the desired temperature.
Specification:
Model | WX180 |
Power | 18000w |
air flow | 4000sqm/ h |
Voltage | 380v,three phase,50HZ |
refrigerating output | 61000BTU |
Usage square meter | 60sqm |
caster | universal |
condensate pump | 14L |
maximum current | 15.8A |
Gas | R22 |
Description:
- Air cooled spot cooler.
- 61000 BTU/HR of cooling.
- Programmable digital controller.
- 380 Volt / 3 Phase power,can be customized.
- long power cord included.
- Many accessories available.
- Full intelligent control,
- Humidity adjustable.
- Dry and wet separation design
- Equipped with universal wheels
- Full intelligent control
Heating Setup: Portable heat pump combines both cooling and heating capabilities in a single, self-contained unit, it offers significantly higher performance, along with the usual high levels of Weixuan quality and reliability.
Dehumidifying Setup: Effective water-damage restoration begins with Weixuan . Dry rooms out quickly to reduce the formation of mold and mildew, and keep them from spreading further. A Weixuan portable unit ensures substantially faster recovery than with fans or dehumidifiers, reducing restoration costs.
Industrial spot cooler