Waterproof 100mic Milky Inkjet Print Film,Economical Inkjet Transparency Film Printing/Inkjet Film

Size:

Roll size: 13”*100’, 17”*100’, 24" x 100', 36" x 100', 42" x 100'

Sheet size: 8.5" x 11",8.5" x 14", 11" x 17", 13" x 19, 17" x 22",A3+, A3, A4,B5.

Standard roll length: 30M

Special size can be customized.

NOTE: Our waterproof inkjet film has two sides, the smooth side and the rough side.
Please print on the rougher side of the film.

Using:

Making the film seal arrow down to the direction, and installed it on the printer.
Prevent the damage of film through friction, folding, fingerprints
Carried out it in the darkroom without exposure and wash processing.
Waterproof, even pour the water when you work (show milky color), also can restore transparency

and use normally after drying.
Although it is waterproof, but we do not recommend to put the film immerse in water deliberately.

Features:

1.Special micro-frosted characteristics which doesn't reduce transparency, while enhance friction of the film surface, eliminate stickiness between films. So films don't stick to each other even under huge pressure or in damp environment.

2.High penetrability, ink penetrate deeply into the layer after drying, so the printed graph is well protected and very hard to be scrubbed off even by hard articles.

3.Excellent ink fixation, prevent ink dots on the film from spreading, extend storage time of printed graph.

4.Transparent as traditional laser phototypesetting films.

5.Density of output screen dots and solid is high enough for printing down, operations are similar to laser phototypesetting film in the course of printing down.

6.All operations are done in light room, darkroom and developing process are omitted, no waste water produced, convenient, and save cost for customers.