Bevel Stainless Steel Pipe 304 Convenient for Welding Process
The groove is mainly used to weld the workpiece to ensure the welding degree. Under normal circumstances, the profile processed by the machining method can also be gas-cut when the requirements are not high. Processing method), but the oxide slag needs to be removed. According to the needs, there are X-shaped grooves, V-shaped grooves, U-shaped grooves, etc., but most of them require a certain blunt edge.
Chemical Composition:
Unit | C | Mn | P | S | Si | Cr | Ni |
<= % | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 18.0-20.0 | 8.0-11.0 |
Machine Capability:
Yield strength (N/mm2) | Tensile strength (N/mm2Mpa) | Elongation | Hardness |
>=205 | >=520 | >=40 | HB <=187 HRB <=90 |
1. Material:
Carbon Steel:Q235,Q195,Q345,etc
200 series:201 202
300 series :301 304 304L 309S 310S 316L 317L 321 904L
400 series :409L 410 420 430 439 441
2. Size:
Length:5.8-12m
Width: 10-800mm or as customer required
Thickness: 1-3mm