201 304 Stainless Steel Coils 3.0mm Cold Rolled Rust Proof
Product Description
What is type 201 stainless steel?
Type 201 is an austenitic chromium-nickel-manganese stainless steel that was developed in the 1950's due to worldwide nickel shortages. In the Type 201 composition, manganese and nitrogen are partially substituted for nickel.
Is 201 stainless steel rust proof?
Type 201 stainless steel is unique as it was created in response to soaring nickel prices. This means that it is cheaper, but it also has much lower nickel content. Without as much nickel, it is not as effective at preventing corrosion.
Specification
Type 201 stainless steel is an austenitic chromium-nickel-manganese stainless alloy. It was developed mid century to conserve nickel and it is used as an alternative to type 301 in some tempered applications. Because of 201 's relatively high yield strength in the annealed condition, use of 201 is limited. Type 201 is generally used in the tempered condition particularly for springs and fasteners. 201 Stainless will retain a comparable ductility to 301 even with the higher yield strength.
Name | Stainless Steel Coil |
Standard | JIS, AiSi, ASTM, GB, DIN, EN |
Material | 201/202/304/316/316L/430/410 |
Surface Treatment | BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirementg,etc. |
Width | 100mm-2500mm or as required |
Thickness | 0.1mm-4mm or as required |
Length | As customer's request |
Inspection | Fully accept all the third party to test before shipment. |
Packing | Standard Export Seaworthy Package.Suit for all kinds of transport,or as required. |
Payment Terms | L/C, T/T |
CHEMISTRY TYPICAL
Carbon: 0.15 max Manganese: 5.50- 7 .50 max Phosphorus: 0.060 max Sulfur: 0.030 max Silicon: 0.75 max Chromium: 18.00- 20.00 max Nickel: 3.50- 5.50 Nitrogen: 0.25 max Iron: Balance
PHYSICAL PROPERTIES OF 201 STAINLESS STEEL
Density: 0.283 lbs/in3 7.81 g/cm3 Electrical Resistivity: microhm-in, (microhm-cm): 27.0 (68.5)
Specific Heat: BTU/lbs./° F (kJ/kg/K): 32 - 212 ° F (0 - 100 °C): 0.12 (0.50)
Thermal Conductivity, BTU/hr/ft/ft2/° F (W/m/K): At 212 ° F (100 ° C): 9.4 (16.2) At 932 ° F (500 ° C): 12.4 (21.4)
Mean Coefficient of Thermal Expansion, in.fin./ °F (µm/m/K)) 32 - 212 °F (0 - 100 °C) 8.7 x 10-5 (15.7) 32 - 600 °F (0 - 315 °C) 9.7 x 10-6 (17.5) 32 - 1000 °F (0 - 538 °C) 10.2 x 10-5 (18.4) 32 - 1200 °F (0 - 649 °C) 10.5 x 10-5 (18.9) 32 - 1600 °F (0 - 871 °C) 11.3 x 1 o-6 (20.3) Modulus of Elasticity, ksi (MPa) 28.6 X 103 (197 X 103) Magnetic Permeability, H=200 Oersteds: Annealed < 1.02 max Melting Range: 2550 - 2650 °F (1399 - 1454 °C)
Why Choose Us?
1. who are we?
We are based in wuxi, China, start from 2018,sell to Domestic Market and Abroad Market. There are total about 51-100 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;
3.what can you buy from us?
stainless steel plate,stainless steel coil,stainless steel sheet,stainless steel pipe and tube,sainless steel bar
4. why should you buy from us not from other suppliers?
Runs perennial exports of quality assured steel mills ,including Shanxi TISCO, Baosteel, Shanghai Krupp, Ningbo Baoxin, Guangzhou Lianzhong, Zhangjiagang Pohang, Qingdao Pohang, Sweden AvestaPolarit, Finland OUTKUMPU, Spain Acerinox, South Africa Columbus