Grade 430 Stainless Steel Coils/Strips

200 Series Stainless Steel Strips
Chromium-nickel-manganese austenitic stainless steel
300 Series Stainless Steel Strips
Chromium-nickel austenitic stainless steel
201 Stainless Steel Strip
Grade 201 stainless steel strip is a lower-cost alternative to the conventional Cr-Ni austenitic stainless steels, such as 304 strips.
202 Stainless Steel Strip
202 stainless steel strip is one of the 200 series stainless steel strips, and China standard grade is 1Cr18Mn8Ni5N.
301 Stainless Steel Strip
Good extension ability, used for mould products. It can also be hardened at machine speed. Good weldability. Abrasion resistance and fatigue strength are better than 304 stainless steel strip.
304 Stainless Steel Strip
304 grade is a common material in stainless steel area, with a density of 7.93 g/cm³, which is also called 18/8 stainless steel in the industry. GB standard is 0Cr18Ni9.
304 stainless steel strip has good weldability. These strips products can be used for vessel parts, stainless steel welding pipes, stainless steel flexible hose and corrugated pipe, etc.
304L Stainless Steel Strip
It is a variant of 304 stainless steel with lower carbon content, used in occasions where welding is required. The lower carbon content minimizes the precipitation of carbides in the heat-affected zone near the weld, and the precipitation of carbides may cause stainless steel to produce intergranular corrosion (welding erosion) in certain environments.
309S And 310S Stainless Steel Strips
Nickel and chromium content are relatively high, in order to improve the oxidation resistance and creep strength of steel at high temperatures.
309S stainless steel strip has high chromium and low nickel content, It can be utilized in sulfur containing atmospheres up to 1000 degree.
310S stainless steel strip is austenitic chromium-nickel stainless steel with good oxidation resistance and resistance, corrosion and high temperature resistance.
316Ti Stainless Steel Strip
Grade 316Ti stainless steel strip contains a small amount of titanium content. Tita

400 SERIES STAINLESS STEEL

The 400 series group of stainless steels typically have an 11% chromium and 1% manganese increase, above the 300 series group. This stainless steel series tends to be susceptible to rust and corrosion under some conditions although heat-treating will harden them. The 400 series of stainless steels have a higher carbon content, giving it a martensitic crystalline structure that provides the end product with high-strength and high-wear resistance. The 400 series steels tend to be used in agricultural equipment, gas turbine exhaust silencers, hardware, motor shafts, and more.

Type 430 stainless steel combines good corrosion resistance with good formability and ductility. It is a ferritic, non-hardenable plain Chromium stainless steel with excellent finish quality. Grade 430 also has excellent resistance to nitric attack, which makes it well suited to use in chemical applications.

CHEMICAL COMPOSITION

MECHANICAL PROPERTIES

430 COMMON APPLICATIONS

The typical applications of grade 430 stainless steels are listed below:

• Dishwasher linings
• Automotive trim
• Range hoods
• Drawn/formed parts
• Industrial roofing & wall cladding
• Utensils
• Handling equipment for mining
• Heat-resisting applications