ASTM A106 GRB carbon steel pipe 5 inch 10 inch ERW round pipe

Product Description:

• Standard: API,GB,ASTM,ASME,DIN..
• Quality Grade:10#,20#,A106 B, A53B,API 5L B,Q235,Q345,SA179,ST37,ST52,etc.
• Dimension: OD:1/2”-24”
  WT:2.5-80mm, SCH10~SCH40~XXL
  Length: any meter is ok.
• Technique: Hot Rolled/Cold Rolled/Cold Drawn
• Application:
  Carbon seamless steel pipes are widely used in gas,water and oil,
  Transportation;constructions; Bridge,highway,windows of model steel door;
  Building materials;fences;heating factories Fluid pipe, conduit pipe,scaffolding pipe .etc.
• Payment Terms:L/C,T/T
• Packing and shipment
  Packaged in bundles, as per customers requirements, it can also be packaged as beveled ends,
  Typed marking, black painting, plastic caps protection,blue plastic bags.
  For 20 ft container the max length is 5.8 m,For 40 ft container the max length is 12m,
  Other options are available based on customer requests. Please discuss when placing order

​

​Application:

• Industrial Water Lines, Plant Piping
• Agriculture and Irrigation
• Galvanized Steel Fencings
• Road Barriers
• Parking Barriers
• Temporary Fencings
• Steel Gates & Windows
• Road Side Railings
• Structural and fabrication work
• Water Pipelines
• Sewerage Systems
• Oil Pipe Lines
• Oil Refinery Piping, Crude Oil Piping

​​

Hydrostatic Testing:

Inspection test pressures produce a stress in the pipe wall equal to 60% of specified minimum yield strength (SMYS) at room temperature. Maximum Pressures are not to exceed 2500 psi for NPS3 and must stay under 2800 psi for the larger sizes. Pressure is maintained for not less than 5 seconds.

Mechanical Tests Specified:

Tensile Test — NPS 8 and larger — either transverse or longitudinal acceptable Smaller than NPS 8 — weighed in lots. Larger sizes — by length. Flattening Test — NPS 2-1/2 and larger. Bending Test (Cold) — NPS 2 and under.

​Chemical Composition:

Physical Properties:

Product Photos: