Aluminium / Aluminum alloys have strong corrosion resistance. They are sensitive to high temperatures ranging between 200 and 250°C (392 and 482°F), and might lose some of their strength. However, the strength of the Aluminium / Aluminum alloys can be increased at subzero temperatures, making them ideal low-temperature alloys.
Aluminium / Aluminum 5052 alloy is a non-heat treatable alloy with good corrosion resistance, especially to salt water.
Standard: ASTM B209,ASTM B210M,etc.
Material: 1050,1060,2014,2024,5052,5083,6061,6083,7075,etc.
Specification:
Diameter: 2-800mm
Length: 2m,3m,5.8m, 6m, or as required.
Surface:
Oxidation,electrophoresis coating,fluorine carbon spraying,powder coating,wood grain transfer printing, mechanical drawing, mechanical polishing, sand blasting,etc,etc.
Aluminium 5052 is an aluminium magnesium alloy which can be hardened by cold work: it is not heat treatable to higher strength. It is about mid way through the series of aluminium magnesium alloys for alloying content and strength.To meet the quality cognizant necessities for our significantly regarded customers, we offer Aluminium Alloy 5052 Round Bars invarious sizes, thickness, principles and shapes according to changed prerequisites given by our customers.
Δ We have our professional international trade team , we can deliver the cargo on time as per the contract ; and settle the issues arising during the transportation promptly ;
Δ Good cooperation with reputation miller , the good quality can be well guaranteed
Δ Provide good after-sale service , we can assign the worker to install the equipment at your site ; if the cargo is damage after reach to your company ,we can settle the problem at the first time ;
Δ We will guarantee the quality for our client from beginning to the end .
GRADE | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Al |
---|---|---|---|---|---|---|---|---|---|
5052 | 0.50 | 0.50 | 3.8/4.9 | 0.30/0.9 | 1.2/1.8 | 0.10 | 0.25 | 0.15 | Balance |
Physical Property | Value |
---|---|
Density | 2.62 g/cc |
Ultimate Tensile Strength | 64-57 Ksi |
Tensile Yield Strength | 42-41 Ksi |
Elongation | 12-4 % |
Mechanical Property | Value |
---|---|
Hardness, Brinell | 47 |
Specific Heat | 0.88 J/g-°C |
Poisson's Ratio | 0.33 |
Melting Point | 607 - 649 °C |
Electrical Resistivity | 4.99e-006 ohm-cm |
Modulus of Elasticity | 70.3 GPa |