3Mesh 3 Holes Per Inch 0.035" 0.047" Diameter Wire Stainless Steel Welded Wire Mesh

Brief Introduction

Stainless Steel Welded Wire Mesh

When welded wire mesh is made, spools of wires are threaded into a weld mesh machine, much like threading wires into the heddle frames and reed of a woven wire loom. Separate spools of wire are then fed through a straightener and pre-cut to match the desired width of the mesh.

As the machine runs, the wires from the spools are fed through the machine. The pre-cut wires are then placed into a mechanism that lays them across the wires being fed from the spools.

After being laid in place, the machine applies a uniform weld at each cross-section simultaneously. Depending on the length of the welded wire mesh panel, the mesh is made available in welded wire mesh rolls or operators take the mesh, cut the access material, and place it into piles of cut-to-size pieces.

Common Material:

SS304, SS304L, SS316, SS316L. Stainless steel in other alloy are availble.

Features: Steady construction, good corrosion resistance and oxidation resistance, etc.

Easy to clean;

Easy to install;

Strong structure;

Beautiful outlook;

Corrosion resistance;

Acid resistance;

Alkali resistance;

Wear resistance;

Flat surface;

Solid structure, strong integrity, even if the cut or in part under pressure not loose or slack.

Applicatioins:

Welded Iron Wire Mesh serves as guards in buildings and factories, animal enclosure and Iron wire mesh fences in agriculture; Welded Iron wire mesh also serves in horticulture industry as guards for trees and plants.

Specifications:

1) Clear Opening. Sample: 1" Opening = a 1" opening, measured from inside wire edge to inside wire edge.

2) Mesh Counts(Meshes/Inch). Sample: 2 Mesh = a total of 2 equal openings within a 1" measurement, from center to center of wire.

3) Mesh Size(Center to Center). 1" Mesh = a 1" measurement from center to center of wire.

Other "Mesh Size", "Mesh Counts", "Wire Diameter", "Opening" as your requests.

Packing:

in waterproof paper in rolls. Custom packing available at request.