Lock crimped is a refinement of the intermediate crimped. It can lock the wire at their position through pressed at each side of the raised wire. This structure can add the stability of the crimped woven wire mesh. Crimped Wire Mesh is made by corbon iron wire, galvanized steel wire or stainless steel wire. Weaving Patterns: Weaving after crimping.
This kind of wire mesh is identified from a wire crimped only in the points of intersection, before weaving. Crimped wire mesh is only made on request and the wire used may be round or square.
Weaving Patterns: Weaving after crimping.
Aperture width: 0.157" - 4"
Wire diameter: 0.039" - 0.189"
Mesh width: up to 80"
Lock Crimp Wire Mesh | ||||
Opening | Wire Diameter | Open Area | ||
mm | Inch | mm | Inch | % |
4.0 | 0.157 | 1.0 | 0.039 | 64.00 |
0.8 | 0.031 | 69.44 | ||
5.0 | 0.197 | 1.2 | 0.047 | 65.04 |
1.0 | 0.039 | 69.44 | ||
0.8 | 0.031 | 74.32 | ||
6.0 | 0.236 | 2.0 | 0.079 | 56.25 |
1.8 | 0.071 | 59.17 | ||
1.6 | 0.063 | 62.33 | ||
1.4 | 0.055 | 65.74 | ||
1.2 | 0.047 | 69.44 | ||
1.0 | 0.039 | 73.47 | ||
8.0 | 0.315 | 2.0 | 0.079 | 64.00 |
1.8 | 0.071 | 66.64 | ||
1.6 | 0.063 | 69.44 | ||
1.4 | 0.055 | 72.43 | ||
1.2 | 0.047 | 75.61 | ||
1.0 | 0.039 | 79.01 | ||
10.0 | 0.394 | 2.5 | 0.098 | 64.00 |
2.0 | 0.079 | 69.44 | ||
1.8 | 0.071 | 71.82 | ||
1.6 | 0.063 | 74.32 | ||
1.5 | 0.059 | 75.61 | ||
1.4 | 0.055 | 76.95 | ||
1.2 | 0.047 | 79.72 | ||
1.0 | 0.039 | 82.64 | ||
12.0 | 0.472 | 4.0 | 0.157 | 56.25 |
3.5 | 0.138 | 59.93 | ||
2.6 | 0.102 | 67.55 | ||
1.5 | 0.059 | 79.01 | ||
12.7 | 1/2” | 4.0 | 0.157 | 57.83 |
3.5 | 0.138 | 61.46 | ||
3.0 | 0.118 | 65.43 | ||
2.5 | 0.098 | 69.81 | ||
2.0 | 0.079 | 74.64 | ||
1.8 | 0.071 | 76.71 | ||
15.0 | 0.591 | 4.8 | 0.189 | 57.39 |
4.5 | 0.177 | 59.17 | ||
4.0 | 0.157 | 62.33 | ||
3.5 | 0.138 | 65.74 | ||
3.0 | 0.118 | 69.44 | ||
2.6 | 0.102 | 72.63 | ||
2.5 | 0.098 | 73.47 | ||
2.0 | 0.079 | 77.85 | ||
19.0 | 0.748 | 4.8 | 0.189 | 63.73 |
4.0 | 0.157 | 68.24 | ||
3.5 | 0.138 | 71.30 | ||
20.0 | 0.787 | 4.8 | 0.189 | 65.04 |
4.5 | 0.177 | 66.64 | ||
4.0 | 0.157 | 69.44 | ||
3.5 | 0.138 | 72.43 | ||
3.0 | 0.118 | 75.61 | ||
2.5 | 0.098 | 79.01 | ||
2.0 | 0.079 | 82.64 | ||
25.0 | 0.984 | 4.8 | 0.189 | 70.37 |
3.5 | 0.138 | 76.94 | ||
3.0 | 0.118 | 79.71 | ||
2.0 | 0.079 | 85.73 | ||
25.4 | 1” | 4.8 | 0.189 | 70.74 |
4.5 | 0.177 | 72.16 | ||
4.0 | 0.157 | 74.64 | ||
3.5 | 0.138 | 77.25 | ||
3.0 | 0.118 | 79.99 | ||
2.5 | 0.098 | 82.88 | ||
30.0 | 1.181 | 4.8 | 0.189 | 74.32 |
4.5 | 0.177 | 75.61 | ||
4.0 | 0.157 | 77.85 | ||
3.5 | 0.138 | 80.20 | ||
3.0 | 0.118 | 82.64 | ||
2.5 | 0.098 | 85.21 | ||
38.1 | 1-1/2” | 4.8 | 0.189 | 78.87 |
4.5 | 0.177 | 79.99 | ||
4.0 | 0.157 | 71.90 | ||
3.5 | 0.138 | 83.88 | ||
3.0 | 0.118 | 85.93 | ||
2.5 | 0.098 | 88.06 | ||
50.8 | 2” | 4.8 | 0.189 | 83.48 |
4.5 | 0.177 | 84.39 | ||
4.0 | 0.157 | 85.93 | ||
3.5 | 0.138 | 87.52 | ||
3.0 | 0.118 | 89.16 | ||
70.0 | 2.756 | 4.8 | 0.189 | 87.58 |
76.2 | 3” | 4.8 | 0.189 | 88.50 |
4.5 | 0.177 | 89.16 | ||
4.0 | 0.157 | 90.27 | ||
3.5 | 0.138 | 91.41 | ||
88.9 | 3-1/2” | 3.5 | 0.138 | 92.57 |
101.6 | 4” | 4.8 | 0.189 | 91.18 |
Other sizes as your special request.
Stable and robust
High temperature resistant
Resistant to alkali and acid
Anti- corrosion
Wear resistance
Can sustain in the demanding conditions involving cold, heat, solvents, liquids, chemicals, and even sand and filter media
High abrasion resistance
Increased ability to resist pitting and crevice corrosion
Filtering
Sizing
Grading
Separating
Shifting
Screening
Grid window
Rack
Lift
Cages
Guards
Trays
Partitions
Poultry protection
Concrete reinforcement
Building construction
Paving
in waterproof paper and film, then in pallets. Custom packing available at request.