Stainless Steel Twill Weave 50micron Opening 0.04mm Wire SS Woven Wire Mesh

50micron Plain Weave SS316L Wire Mesh

Type 316L or T-316L is a very low carbon stainless steel containing molybdenum for superior corrosion resistance. 316L stainless steel wire mesh screen is particularly resistant to pitting by solutions containing chloride ions, phosphoric acid, sulfuric acid, and brine solutions. The general corrosion resistance is similar to Type 316 SS, but 316L SS has superior resistance to intergranular corrosion following welding. Type 316L is used over 316 in assemblies which cannot be annealed after fabrication by welding. Can be used at temperatures up to 1600°F. Type 316L wire mesh screen is nonmagnetic in the annealed, and slightly magnetic when cold worked. Like 316 SS, 316L SS wire mesh screen is widely used in chemical, food, pharmaceutical, medical, refining, power plant, aircraft, photographic, textile, paper equipment and strainers.

Twill Weave Mesh is fabricated by passing every shute wire alternately up and down of two warp wires. The pattern is staggered on following warp wires, providing a parallel diagonal lines appearance. Twill Weave Wire Mesh permits the use of relatively heavier wires in the specific mesh count than is feasible in the plain weave mesh. This mesh has broad application tendency of supporting larger loads and finer filtrations.

Standard Specifications:

Other specifications according to your requirements.

Material: SS316L.

Weave Type: Twill Weave

Characteristics:

High tension, much higher tension than common polyester mesh,and this property is very suitable.

Super precision: uniform wire diameter and aperture with extremely low difference.

Low elongation: very small elongation of wire mesh at high tension.

High flexibility: the wire mesh will not lose elasticity at extreme tension.

High corrosion resistance: the excellent corronsion resistance of stainless steel wire exceeds polyester fiber.

Non-electrostatic: to avoid affects of nonelectrostatic for printing and ensure the ety of priting.

Good heat melting resistance:special features of steel wire mesh suitable for heta-melting ink.

Good solvent resistance: to avoid the affects of any solvents to wire mesh.

Applications:

Pressure filters for fine filtration in hydraulic steering equipment.
Oil and fuel filters.
Pressure and vacuum filters.
As porous media for fluid beds.
Filter candles.
Medical science.
Food and beverage industry.
Plastics industry.

Packing:

Water-proof paper first then plastic film, in wooden case or pallets.