Neoperl Bubbler Imported From Switzerland

The materials used in the neoper bubbler are all comply with the relevant national standards for drinking water. They have been tested by independent laboratories to ensure health and safety, such as wras in the UK, ACS-CSTB in France, DVGW [KTW] in Germany, NSF in the United States, WATER-MARK in Australia and KIWA in the Netherlands.

Domestic Brand Jiuda Bubbler

Juda bubbler shapes the water flow and adjusts the velocity to meet the water saving requirements of the corresponding countries, such AS GB certification in China, EN in EU, ASME in USA, AS in Australia, BS in UK, NBR in Brazil, TIS in Thailand, SAS in Saudi Arabia and so on.

How to maintain stainless steel faucet

1. During installation, we need to avoid direct impact or collision with hard objects, and do not put cement, glue and other sticky substances on its surface, so as not to damage the coating luster on the surface of the faucet. If the stainless steel faucet is going to be used in a new house, there may be gravel impurities in the water. We must remove the debris in the water pipe before installation, and let the water until the water quality becomes clear before continuing to install the stainless steel faucet.

2. Normally, when we use it, we should open and close it lightly, and it is not advisable to use too much force. We only need to gently twist the faucet according to its opening direction. After use, we should wipe the surface of the stainless steel faucet clean, so as not to be rusted on the surface and affect its gloss. If the water pressure of other faucets is normal and the water flow from a certain faucet is not smooth, then we need to remove the mesh cover at the outlet of the faucet and clean it again. Generally, it can be restored to its original state.