Precision 1.4362 duplex stainless steel Pipe , Seamless Stainless Steel Tubing Custom Sizes​

2205 is a Duplex Stainless combination of Ferritic & Austenitic. It has higher corrosion resistance than 316 (3% min. Moly vs 2% in 316) Duplex 2205 is highly resistant to stress corrosion & Chloride cracking. Duplex 2205 is cost effective because it has only 5% Nickel. Duplex stainless has high strength, ductility, toughness and weldability.

We offer Stainless steel supplies and stainless steel supply items for all stainless steel tube sizes. We are leading stainless steel tube suppliers, stainless steel tubing suppliers.

Specifications:

UNS S31803

ASME SA-182 (F51), SA-240, SA-798, SA-790, SA-815
ASTM A182 (F51),A240, A276, A479, A789, A790, A815, A928, A988
SAE J405

UNS S32205

ASME SA-182 (F60), SA-240, SA-798, SA-790, SA-815
ASTM A182 (F60), A240, A276, A479, A480, A798, A790, A815, A928, A988
SAE J405

2205 is a duplex (austenitic-ferritic) stainless steel containing about 40 - 50% ferrite in the annealed condition. 2205 has been a practical solution to chloride stress corrosion cracking problems experienced with 304/304L or 316/316L stainless. The high chromium, molybdenum and nitrogen contents provide corrosion resistance superior to 316/316L and 317L stainless in most environments. 2205 is not suggested for operating temperatures above 600°F.

The design strength of 2205 is significantly higher than 316/316L, often permitting lighter wall construction. 2205 has good notch impact toughness down to temperatures below - 40°F.

Features

Quality Assurance:

Spezilla's duplex stainless steel tubes are produced acc. to the following process and inspection to assure our quality:

1. Chemical Composition Analysis Test With 100% PMI.

2. Solution Annealing / Bright Annealed.

3. 100% Hydrostatic Test and 100% Eddy Current Test

4. Mechanical Tests includes Tension Test, Flattening Test, Flaring Test, Hardness Test.

5. Impact Test subject to Standard request.

6. Grain Size Test and Intergranular Corrosion Test.

7. Visual Test and Endoscope Test for Surface Quality Test

Typical Manufacturing Specifications:

EN10217-7

ASTM A789

Also individual customer specifications.

Chemical Compositions: