ASTM A268 TP410 3/4'' X BGW14 X 7315MM Seamless Martensitic Stainless Steel Tube

TP410 is a basic straight chromium high hardenability martensitic stainless steel with good strength and fairly good corrosion resistance as generally supplied hardened and tempered in the tensile range 700 - 850 Mpa (condition R) Brinell range 201 - 255.Characterised by good corrosion resistance in mild atmospheric industrial and domestic environments coupled with good strength and excellent toughness in the hardened and tempered condition. 410 due to its excellent hardenability is capable of being through hardened to over Rc40 depending upon carbon content and section size. Small sections can be air cooled and larger sections oil quenched for maximum through hardness.Pre hardened and tempered 410 will also respond readily to nitriding achieving a typical surface hardness of over Rc65. The nitriding process however reduces the corrosion resistance and is therefore not generally recommended except for critical applications where the benefit outweighs all other considerations.

Description:

Available Tube Product Forms:

Straight.
Coiled.

Typical Applications:

Used for parts requiring a combination of good strength and toughness, plus reasonable corrosion resistance. Typical applications are: Bolts, Bushings, Fasteners, Gas Turbine Parts, Mine Equipment, Pump Parts, Petrochemical Equipment, Steam Turbine Parts, Studs, Valve Parts etc.

Material magnetic in all conditions.
Quality Assurance:

Spezilla's seamless bright annealed stainless steel tubes are produced acc. to the following process and inspection to assure our quality:

1. Chemical Composition Analysis Test With 100% PMI.

2. Solution Annealing / Bright Annealed.

3. 100% Hydrostatic Test and 100% Eddy Current Test

4. Mechanical Tests includes Tension Test, Flattening Test, Flaring Test, Hardness Test.

5. Impact Test subject to Standard request.

6. Grain Size Test and Intergranular Corrosion Test.

7. Visual Test and Endoscope Test for Surface Quality Test

Typical Manufacturing Specifications:

ASTM A268

ASME SA268

Also individual customer specifications.