EN 10088 1.4845 / 310S / UNS S31008 Stainless Steel Plate & Sheet Thickness 0.5 - 60.0mm for Boiler

Detail Size of 310s Stainless Steel Plate We have

About 310S Stainless Steel

Alloy 310 (UNS S31000) is an austenitic stainless steel developed for use in high temperature corrosion resistant applications. The alloy resists oxidation up to 2010oF (1100oC) under mildly cyclic conditions.

Because of its high chromium and moderate nickel content, Alloy 310 is resistant to sulfidation and can also be used in moderately carburizing atmospheres.

The more severe carburizing atmospheres of thermal process equipment usually require nickel alloys such as 330 (UNS N08330). Alloy 310 can be utilized in slightly oxidizing, nitriding, cementing and thermal cycling applications, albeit, the maximum service temperature must be reduced. Alloy 310 also finds usage in cryogenic applications with low magnetic permeability and toughness down to -450oF (-268oC). When heated between 1202 – 1742oF (650 – 950oC) the alloy is subject to sigma phase precipitation. A solution annealing treatment at 2012 – 2102oF (1100 – 1150oC) will restore a degree of toughness.

310S (UNS S31008) is the low carbon version of the alloy. It is utilized for ease of fabrication. 310H (UNS S31009) is a high carbon modification developed for enhanced creep resistance. In most instances the grain size and carbon content of the plate can meet both the 310S and 310H requirements.

Alloy 310 can be easily welded and processed by standard shop fabrication practices.

Chemical Analysis

Weight % (all values are maximum unless a range is otherwise indicated)

Applications

• Cryogenic Components
• Food Processing
• Furnaces – burners, doors, fans, piping and recuperators
• Fluidized Bed Furnaces – coal combustors, grids, piping, wind boxes
• Ore Processing/Steel Plants – smelter and steel melting equipment, continuous casting equipment
• Petroleum Refining – catalytic recovery systems, flares, recuperators, tube hangers
• Power Generation – coal gasifier internals, pulverized coal burners, tube hangers
• Sintering/Cement Plants – burners, burner shields, feeding and discharging systems, wind boxes
• Thermal Processing – annealing covers and boxes, burner grids, doors, fans, muffles and retorts, recuperators, walking beams