Stainless Steel Drain Grate Grating Grille For Water Leakage And Machine Use

Stainless steel drain grate grille features

• The biggest advantage of stainless steel grille is high degree of automation, high separation efficiency, low power consumption, no noise, good corrosion resistance, continuous and stable operation under unattended conditions, and its own mechanical overload safety protection device. In the event of equipment failure, the shear pin is cut to avoid overloading the equipment and damaging equipment components.
• The device can adjust the running interval of the equipment according to the user's needs to achieve periodic operation; the device can be automatically controlled to start and stop according to the liquid level difference before and after the grille; and there is manual control function to facilitate maintenance. Users can choose according to different work needs.
• Due to the reasonable structural design of the equipment, when the equipment is working, it has a strong self-cleaning ability and does not cause clogging, so the daily maintenance workload is small.

Stainless steel drain grate grille

• It is a special water treatment equipment that can automatically intercept and remove various shapes and impurities in the fluid continuously, and can be widely applied to urban sewage treatment. Water supply industry, power plant inlet, can also be used as a pre-stage screening equipment in the wastewater treatment process of textile, food processing, papermaking, leather and other industries.

Stainless steel drain grate grille working principle

• The stainless steel grille is assembled from a unique set of molars into a set of swivel grill chains. Driven by the motor reducer, the chain of the tooth is rotated in the direction of the reverse flow, and the scum floating on the water surface is salvaged. When the chain is moved to the upper part of the device, each group is guided by the guide wheel and the curved track. Relative self-clearing motion occurs between the molars, and most of the solid matter falls by gravity. The other part relies on the reverse movement of the cleaner to clean the debris sticking to the molars.
• According to the direction of the water flow, the dent chain is similar to the grid, and the molar gap assembled on the sprocket chain can be selected according to the conditions of use. When the molars separate the solid suspension in the fluid, the flow of water can be ensured. The whole work process is continuous or intermittent

Some of our projects