Unique Design Sanitary Sample Valves Pneumatic Type For Aseptic Sampling System

Application

HYHAU series is a stainless steel aseptic sampling valve with pneumatic actuator; it is wildly used in the food, dairy, brewery, winery and many other hygienic industries.

Materials

Materials: AISI-316L
Size: DN8
Diaphragm: Silicone (for standard valve), EPDM (for valve with micro type connector)

Design:

• Sanitary sampling valve consists of three parts – a valve body, a valve head and a membrane. The rubber membrane is placed on the stem of the valve head and works as a stretchable plug.
• The membrane functions are both – as a dynamic packing in the valve seat and as a hygienic, static packing against the valve body.
• The unique design eliminates dead spaces and preventing microbial and particulate build-up -which may interfere with microbiological test results.
• Perfect hygienic design and surface finish of the inner part of sanitary sampling valve enables absolute sterilization in a closed state.
• Sterilization and sampling can be carried out regularly without interrupting the production process.
• Easily attached to a liquid distribution line or a storage tank.

Nominal Pressure:

Max. product pressure: 87psi (6bar)

Temperature:

Max. sterilization temperature: 130°C, dry steam: 121°C (2bar).
Steam must be dry, because condensed water will damage the diaphragm. The diaphragm should be replaced after 100 times samplings or sterilizations.

Sample Valves and Equipment,offers a wide array of sanitary sample valves for many applications including beverage, semiconductor and biopharmaceutical water systems. Our stainless steel sampling valves allow the user to easily extract a sanitary sample of a liquid for analysis.

Sanitary Solutions is your source for a T304 Sanitary Sample Valve primarily found in the Beverage, Brewery, Pharmaceutical, Tank and Winery Industries. Our TP304 Sanitary Sample Valve is clamp end with either a 3/8" or 1/2" spout depending on the size needed. As for the surface finish of the valve, our valve is polished to meet sanitary standards.

Sanitary sample valve is a type of valve used in process industries that allows taking a representative portion of a fluid (gases, liquids, fluidized, solids, or slurries) to test (e.g. by physical measurements, chemical analysis, microbiological examination), typically for the purposes of identification, quality control, or regulatory assessment. It is a valve used for sampling.

Sanitary Solutions is your source for a T304 Sanitary Sample Valve primarily found in the Beverage, Brewery, Pharmaceutical, Tank and Winery Industries. Our TP304 Sanitary Sample Valve is clamp end with either a 3/8" or 1/2" spout depending on the size needed. As for the surface finish of the valve, our valve is polished to meet sanitary standards.

Strength:

• Material of stainless steel 316L and 1.4404 is from reputed mill to guarantee the chemical composition and mechanical properties. Material certificate will be submitted follow to orders.
• Forged valve body and disc to control the leakage and visual.
• Superior facilities and good experiences for fabrication.
• In ability to improve and develop new design.
• Fast delivery is possible to meet your needs well in time.
• Low cost from bulk production will reduce your budget and improve your business.
• Small quantity available.

Quality & Inspection:

• PMI test to verify material grade
• Dimension controlling during fabricating and finished
• Visual and surface 100% examination before shipment
• Packed in carton box firstly, then in wooden case
• Third party inspection available.