High Tensile 65Mn 45# crimped wire mesh with square Hole,rust-prevention with spray paint or oil painting
1.GENERAL INTRODUCTION
Material | Mild steel/low carbon steel/ High Carbon Steel,/Stainless steel Wire |
Wire diameter | 0.5-22mm |
Aperture / Opening | 2mm - 100mm |
Width | 0.5-4m(ususaly within 2m) |
Length | 1-30m or as your requestd |
Technique | weaving after crimping(pre-crimped) |
Weaving method | Plain Crimp/Intermediate Crimp/ Lock Crimp/Flat Top Crimp/Slotted Hole |
Mesh type | Square, rectangular and long slot |
Surface treatment | anti-rust oil or anti-rust painting |
Edge | Plain, bent, welded shroud, bolt shroud |
2.FEATURES
* wearable
* high temperature-proof.
* Good toughness, shake-proof and draw-proof
* keep-distance, better rate filter than sheet iron screen.
3.MAIN MATERIAL Chemical Composition
No. | Steel Grade | Chemical Composition | ||
C | Si | Mn | ||
1 | 45 | 0.42-0.50 | 0.17-0.37 | 0.50-0.80 |
2 | 50 | 0.47-0.55 | ||
3 | 55 | 0.52-0.60 | ||
4 | 60 | 0.57-0.65 | ||
5 | 65 | 0.62-0.70 | ||
6 | 70 | 0.67-0.75 | ||
7 | 65Mn | 0.62-0.70 | 0.90-1.20 | |
8 | 72A | 0.70-0.75 | 0.15-0.35 | 0.30-0.60 |
4.WEAVING TYPES &EDGE TYPES
5. SPECIFICATION
65Mn Crimped wire mesh, Square wire mesh, mining scree wire mesh Specification:
NO. | Wire diameter (mm) | Aperture/ Hole size (mm) | Weight (kg/sqm) |
1 | 12 | 75 | - |
2 | 10 | 38 | - |
3 | 9 | 32 | 25 |
4 | 8 | 22 | - |
5 | 7 | 25 | 19.5 |
6 | 6 | 10 | - |
7 | 4 | 10 | 14.5 |
8 | 2.5 | 6 | 9.3 |
9 | 2.2 | 4 | 10 |
Common Specification for Different Material
Number | Hole size | Wire Diameter | Hole size | Wire Diameter | Opening rate |
(mm) | (mm) | (Inch) | (Inch) | (%) | |
1 | 101.66 | 12.7 | 4 | 0.5 | 79.01% |
2 | 88.9 | 12.7 | 3.5 | 0.5 | 76.56% |
3 | 76.2 | 12.7 | 3 | 0.5 | 73.47% |
4 | 63.5 | 12.7 | 2.5 | 0.5 | 69.44% |
5 | 63.5 | 9.19 | 2.5 | 0.362 | 76.31% |
6 | 57.15 | 9.19 | 2.25 | 0.362 | 74.21% |
7 | 50.8 | 12.7 | 2 | 0.5 | 64.00% |
8 | 50.8 | 11.1 | 2 | 0.437 | 67.35% |
9 | 50.8 | 9.19 | 2 | 0.362 | 71.71% |
10 | 50.8 | 7.92 | 2 | 0.312 | 74.84% |
11 | 44.45 | 9.19 | 1.75 | 0.362 | 68.67% |
12 | 44.45 | 7.92 | 1.75 | 0.312 | 72.04% |
13 | 41.28 | 9.19 | 1.625 | 0.362 | 66.89% |
14 | 41.28 | 7.92 | 1.625 | 0.312 | 70.39% |
15 | 38.1 | 9.19 | 1.5 | 0.362 | 64.91% |
16 | 38.1 | 7.92 | 1.5 | 0.312 | 68.54% |
17 | 38.1 | 7.19 | 1.5 | 0.283 | 70.77% |
18 | 31.75 | 9.19 | 1.25 | 0.362 | 60.14% |
19 | 31.75 | 7.92 | 1.25 | 0.312 | 64.06% |
20 | 31.75 | 7.19 | 1.25 | 0.283 | 66.49% |
21 | 31.75 | 6.17 | 1.25 | 0.243 | 70.11% |
22 | 31.75 | 5.72 | 1.25 | 0.225 | 71.80% |
23 | 28.58 | 7.92 | 1.125 | 0.312 | 61.31% |
24 | 28.58 | 7.19 | 1.125 | 0.283 | 63.84% |
25 | 28.58 | 6.17 | 1.125 | 0.243 | 67.64% |
26 | 28.58 | 5.72 | 1.125 | 0.225 | 69.42% |
27 | 25.4 | 7.92 | 1 | 0.312 | 58.11% |
28 | 25.4 | 7.19 | 1 | 0.283 | 60.75% |
29 | 25.4 | 6.17 | 1 | 0.243 | 64.73% |
30 | 25.4 | 5.72 | 1 | 0.225 | 66.62% |
31 | 25.4 | 5.26 | 1 | 0.207 | 68.63% |
6. RUST- PREVENTION
7.product inspection to ensure our goods are all qualified
8.APPLICATION SHOWN
9. LOADING SHOW