Quick Detail:

super Duplex S32750 stainless Steel plate

Grade :S32750

Surface:NO.1 finished

Thickness:3-150mm

Size:1000*2000;1250*2500;1219*2438;1500*3000/6000mm

Mill:TISCO,BAO STEEL

Description:

super Duplex S32750 stainless Steel plate
Alloy 2507 UNS S32750 is super duplex stainless steel with 25% chromium, 4% molybdenum, and 7% nickel designed for demanding applications which require exceptional strength and corrosion resistance, such as chemical process, petrochemical, and seawater equipment. The steel has excellent resistance to chloride stress corrosion cracking, highthermal conductivity, and a low coefficient of thermal expansion.

Super duplex grades have enhanced pitting and crevice corrosion resistance when compared with 300-series austeniticstainless steel or conventional duplex alloys. This can be attributed to the enhanced levels of chromium, molybdenum and nitrogen found in these materials. Alloy 2507 is the most common “super” duplex grade.

Usage of Duplex 2507 should be limited to applications below 6000 F (3160 C). Extended elevated temperature exposure can reduce both the toughness and corrosion resistance of alloy 2507.The high chromium, molybdenum, and nitrogen levels provide excellent resistance to pitting, crevice, and general corrosion.the duplex structure provides 2507 with exceptional resistance to chloride stress corrosion cracking.

Duplex 2507 possesses excellent mechanical properties. Often a light gauge of 2507 material can be used to achieve the same design strength of a thicker nickel alloy. The resulting saving in weight can reduce the overall cost of fabrication.

Super Duplex Corrosion Resistance, The high chromium and molybdenum content of Super Duplex makes it extremely resistant to uniform corrosion by organic acids like formic and acetic acid. Super Duplex also provides excellent resistance to inorganic acids, especially those containing chlorides.

•High resistance to chloride stress corrosion cracking
•High Strength
•Superior resistance to chloride pitting and crevice corrosion
•Good general corrosion resistance
•Suggested for applications up to 6000 F
•Low rate of thermal expansion
•Combination of properties given by austenitic and ferritic structure
•Good weldability and workability

Applications:

Oil and gas industry equipment
Offshore platforms, heat exchangers, process and service water systems, fire-fighting systems, injection and ballast water systems
Chemical process industries, heat exchangers, vessels, and piping
Desalination plants, high pressure RO-plant and seawater piping
Mechanical and structural components, high strength, corrosion-resistant parts
Power industry FGD systems, utility and industrial scrubber systems, absorber towers, ducting, and piping

Specifications:

Duplex Heat Resistance

2507 should be solution annealed and quenched after either hot or cold forming. Solution annealing should be done at a minimum of 1925F. Annealing should be followed immediately by a rapid air or water quench. To obtain maximum corrosion resistance, heat treated products should be pickled and rinsed.