Sweet Potato Starch Grinder Machine Large Capacity Rasper Sweet Potato Mill

Description of sweet potato grinder machine

Sweet potato starch is mainly stored in the fleshy part of the root, the raw material particles are relatively large, the internal organization is not easy to destroy, the use of repeated file grinding, fully destroy the sweet potato block structure, can make the small starch particles can be successfully free from the root, improve the extraction rate of starch.

Main technical parameters

Structure introduction
Complete machine consists of rotor, rasping blade, engine base, upper cover, side cover, bearing base, gearing, motor, etc.
1. Engine base props up all components, which rotor and bearings are all fixed on.
2. Rotor is made of special stainless steel, uniform grooves on the surface to install saw blade.
3. Saw blade is comprised of 2 stainless-steel layer with locating pin and a saw blade.
4. Combined rasping blade are equipped on both side of rotor, which could achieve rotor two-way rotating and crests higher crushing rate.
5. A sieve is equipped between rasping blades, which is tensioned by two sets tensioning instruments.
6. For easy operation, upper shell divides into two parts, upper cover and side cover.
7. Use Sweden SKF Bearings and German opittle belt.
8. Motor drives rotor by belt, which is protected by sealed protective cover.

The working principle of rasper

The material enters into the body of the file mill shell through the upper entrance, and is broken by the impact, shear and grinding effect of the saw blade moving at high speed. The lower part of the rotor is equipped with a screen screen. The material smaller than the size of the screen hole is discharged through the screen plate, and the particles larger than the size of the screen hole are blocked and remain on the screen plate to continue to be hit and grinder by the saw blade.

Our Service

Pre-sale service

1.Accept customer consultation and customize products according to customer requirements.

2.Provide customers with product process, equipment parameters and processes, and train personnel according to customer requirements.

Sale service

1.The company sent technical personnel to the scene of the on-the -spot guidance equipment installation,debugging and training operators.

2.If there is any problem during the installation, please contact the responsible person in time. We will solve the problem in time to ensure the installation progress.

After-sale service

1.Provide telephone and video support. If the customer has any problems or abnormal devices in use, you can contact us by phone. We will help the customer solve the problems by phone or video.

2.If the phone or video doesn't work, the company will send technicians to the scene to fix the problem.

3.Products purchased in our company, we provide one-year warranty and lifelong maintenance service.