Starter Armature Testing Machine Belt Spins The Rotor During The Test WIND-ATS-02

(1) Application

Starter armature upto 36 slots

covering 13, 17, 19 (few), 21,23,25,27, 28,29,33 slots (common)

(2) Competitive Advantages

1. Moden concept initial positioning, comparing to tranditional starter armature tester,

the operator no need to check initial positioning manually,

Make the testing convenient and easier.

2. 100% Satisfied feedback from starter armature manufacturers.

(3) Technical Data

1. Bar to Bar resistance,0.01mΩ~10mΩ (Out of range display OVER)

Four-terminal measurement to ensure accuracy

2. Welding resistance,0.001mΩ-10mΩ (Out of range display OVER)

Six-terminal measurement to ensure accuracy

3. Cross resistance 0.01mΩ-10mΩ

Four-terminal measurement to ensure accuracy

4. Surge 100-1000V (100V/time)

Pulse crest:0.5u sec, Frequency 1~40MHz

Standard waveform is Write, OK waveform is Green, NG waveform is Red

5. Isolation resistance DC 500V

Testing time:1~10s (0.1s/time)

Range:1~500MΩ

Accuracy: ≤±5%

DC Voltage insulation has the advantages such as it has little insulation damage to the tested product,

The leakage current can be measured simultaneously in the measurement of insulation and it is easy to

find the end of the motor insulation leakage.

6. Hipot AC 100-1000V

Testing time:1~10s (0.1s/time)

Armature commutator bars ≤ 36 bars

Testing panel cycle time: 8~9s (according to 33 bars)

13, 17, 19 (few), 21,23,25,27, 28,29,33 slots (common)

(4) Main Configuration

15’’ Touch screen Sampling Chip: BB Relay:NAIS High voltage relay:Meder

Pneumatic parts:Airtec

Power: AC 220V,50Hz

Air pressure:0.4~0.6MPa

Temperature:0~45℃

Dimension: 950mm*1250mm*580mm

HS Code:9030390000

(5) Inspection report before delivery

Please click below link to view video

https://youtu.be/wspDmeOKfoo